Skip to article
AHFE AHFE Discoveries AHFE International Open Access Journal
AHFE OPEN ACCESS OPEN ACCESS CONFERENCE PROCEEDINGS PAPER

Beyond The Lockdown: Investigating the Impact of COVID On Technology Adoption In The Construction Industry

Cidb Centre of Excellence, University of Johannesburg, South Africa ↗
Publication year
Digital Object Identifier10.54941/ahfe1004433

Abstract

The coronavirus pandemic significantly impacted every aspect of human life and endeavour. It caused deep disruptions in every sector due to the various measures enacted to curb its spread. One of the many measures was the lockdown and work-from-home measures. These measures, among other disruptions, informed the adoption of various technologies. Through a quantitative approach, this study studied the impacts of the Covid 19 pandemic by identifying the various technologies and innovations adopted in the construction industry due to the coronavirus pandemic. A well-structured questionnaire was randomly distributed to construction professionals in South Africa. The results reveal that the adopted technologies due to the COVID-19 impacts can be classified into “construction technologies” and “smart building technologies”. Also, the study ranked the various technologies adopted based on their significance.

INTRODUCTION

The novel COVID-19 pandemic created severe health challenges and impacted the global community deeply. Every facet of the human popula- tion and sectors of the economy felt the impacts of the pandemic. Han et al. (2020) in their study, focused on nine countries and regions which were anal- ysed to provide a cross-country perspective. The study discussed the impact of the pandemic on the human populace using different countries and regions; it also identified the various mitigation measures being adopted in the coun- tries adopted for the study. It was observed that although the pandemic is global and similar measures were being undertaken, however, the approach to reducing the impact is context-dependent. Similarly, Jamaludin et al. (2020) presented various strategies, measures and impacts of the Covid 19 on the different aspects of human lives The construction industry was severely impacted by the pandemic, and due to this impact, various research has been conducted on the construc- tion sector. Assaad & El-adaway (2021) revealed that the pandemic revealed the weakness in the integrated global supply chain. The study also proposed several areas that require research in the construction industry to manage

© 2023. Published by AHFE Open Access. All rights reserved. 324

Beyond the Lockdowns: Investigating the Impact of Covid on Technology Adoption 325

the pandemic impact better and improve the construction industry outlook. In the United States, it was observed that the construction industry suffered from shortage of material and delays in supply, reduced efficiency and pro- ductivity, expected increase in disputes, suspension of ongoing projects, and price escalation, among others (Alsharef et al., 2021). However, the study also identified that despite the challenges, the pandemic also presented some opportunities for the construction industry, this includes lower interest rates and the ability to recruit skilled workers, among others. The impacts identi- fied are similar to that identified by Gamil & Alhagar (2020); these include a shortage of workers, escalated price of materials, shortage of materials and supply chain challenges.

In the Philippines, it was observed that various firms responded to the pan- demic differently. Based on the company size, it was observed that smaller firms adapted faster and better when compared to large firms with more manpower. According to Cabanesas et al. (2021), although many firms in construction complied with the effect of the pandemic in terms of health and safety requirements, total compliance was not achieved. Compliance was achieved more with smaller firms; however supply chain was discovered to be majorly affected generally.

Similarly, the impact of the pandemic was observed on the field and office workforce. It was found that an unsafe working environment, lim- ited access to tools, social isolation, personal and family related challenges were some of the challenges faced during the pandemic (Pamidimukkala & Kermanshachi, 2021). In a similar vein, Araya (2021) studied the pan- demic as it affects construction workers. The study posits a reduction of workers on sites to between 30% to 90% due to the impacts of the pandemic. Most design professionals could work from home during the pan- demic, and some experienced increased productivity during this period (Bsisu, 2020). However, working from home could not apply to site workers and other professionals who require on-site physical presence to execute their obligations.

Despite many studies viewing the pandemic impact mostly as nega- tive, Esa et al. (2020) viewed it from both positive and negative con- sequences. This was based on a COVID-inspired measure implemented by the Malaysian government. The study opined that safety preven- tion and regulatory compliance were a positive offshoot of the pan- demic on construction sites. This was attributed to the stricter and more frequent implementation of safety measures to reduce covid impact. On the other hand, the study identified the negative impacts on time, cost, human resource and resource availability towards achieving project success.

On the contractual aspect and its attendant issues due to the pandemic, the pandemic brought about the introduction and necessity for a review and update of the force majeure clause in the construction industry (Hansen, 2020). It thus introduced a new perspective to all existing processes and regulations in the construction industry. Salami et al. (2021) opine that the increase in contractual disputes due to the disruptions caused by the pan- demic can be mitigated through conflict avoidance measures. The study

lists maintaining strong relationships and reevaluating contractual terms as some of the significant measures taken by construction organisations in dealing with the contractual consequences of the pandemic. Similarly, Adekunle et al. (2023) critically analysed the construction industry in light of the coronavirus and provided some insights on the lifeline available to the industry.

Although the industry has been severely impacted like other sectors adversely, it has been identified to be a critical contributor to the recovery of the economy. This can be studied from two perspectives: the recovery of the economy through the construction industry and the construction sec- tor’s recovery. Firstly, the construction industry is observed can create social value, social and economic outcomes for workers through increased infras- tructural spending to achieve sustainable recovery from COVID-19 impacts (Denny-Smith et al., 2021). Regarding the recovery of the construction indus- try from the pandemic, technological adoption has been observed to be critical (Ebekozien & Aigbavboa, 2021). On the recovery of the sector and the role of the adoption of technology, Pamidimukkala & Kermanshachi (2021) and Majumder & Biswas (2021) opined that the use of technology should be encouraged in the construction industry and as a strategy to over- come some of the challenges introduced by the pandemic. This is supported by the benefits inherent in the adoption of the technologies in the construc- tion industry, and the transformation observed, among others (Adekunle, Aigbavboa et al., 2021; Ejohwomu et al., 2021).

Unfortunately, the construction industry has been observed to be a slow adopter of technology. Given the measures adopted during the pandemic and the impacts of the same, on the construction industry, this study investigated the impacts of the pandemic on technology adoption in the construction industry. It identified the various technologies that were covid inspired or motivated in terms of adoption through the impacts. Therefore, the study aim to identify the emerging technologies that were adopted especially in the developing country context.

RESEARCH METHODOLOGY On the one hand, the construction industry is a slow adopter of technology and, on the other hand, heavily impacted especially in developing countries, by the pandemic. This study identified the COVID-19 inspired technologies adopted in the South African construction industry; a quantitative approach was adopted whereby the interaction of the variables was tested and eval- uated. The quantitative approach has been adopted to achieve objective evaluation and investigation of various challenges in the construction indus- try (Adekunle et al., 2022; Aliu et al., 2022; Ikuabe et al., 2022; Oladiran & Onatayo, 2019). A structured questionnaire was administered to con- struction industry professionals in the South African construction industry. Random sampling was used during the data collection granting all profes- sionals equal opportunities of partaking in the study. A reliability test of the instrument through Cronbach’s Alpha reveals a value of 0.968. This is considered an acceptable value.

Beyond the Lockdowns: Investigating the Impact of Covid on Technology Adoption 327

FINDINGS

BACKGROUND INFORMATION OF RESPONDENTS The respondents for this study possess various educational qualifications. 41.90 % are bachelors degree holders, 23% are professionals with diplo- mas, while 5.40% are professionals with a masters degree, and 29.70% are professionals with qualifications other than the ones listed but are skilled and experienced. Professionals for the study included quantity surveyors (20.30%), electrical engineers (4.10%), construction managers (2.7%), con- struction health and safety were 2.70%, mechanical engineer was 1.40%, and Architects were 1.40%. Other professionals constitute 67.60% of the respondents. As regards experience in the construction idnsutry, 71.62% of respondents had experience under 1 year, 20.27% possess between 1–5 years of experience, while 4.10% possess between 6–10 years of experience, and the proportion of respondents with more than 20 years of experience is also 4.10%. Other information on the respondents are presented in Table 1.

Table 1. Respondents background information.

Table available in the original PDF paper.

Highest educational qualification % Others 29.70% Master’s Degree 5.40% Bachelors Degree 41.90% Diploma 23.00%

Profession % Quantity surveyor 20.30% Other 67.60% Mechanical Engineer 1.40% Electrical Engineer 4.10% Construction Manager 2.70% Construction H & S Officer 2.70% Architect 1.40% Years of experience % Under 1 year 71.60% More than 20 years 4.10% 6–10 years 4.10% 1–5 years 20.30%

Institution % Other 63.50% Government 9.50% Contractor 13.50% Consultant 10.80% Client 2.70%

COVID MOTIVATED ADOPTED EMERGING TECHNOLOGIES The results in Table 1 present the MIS and SD of the variables for this study. It should be noted that all the variables are significant, with values above 3.00. The highest ranked is Internet of things (MS = 3.93, SD = 1.090), followed by Building information modelling (MS = 3.88, SD = 1.046), Cloud-based systems (MS = 3.86, SD = 1.051), Data Collection Apps (MS = 3.80, SD = 1.158), Artificial intelligence (MS = 3.77, SD = 1.165), Building management systems (MS = 3.74, SD = 1.159), Big Data (MS = 3.73, SD = 1.126), Radio-frequency identification (MS = 3.73, SD = 1.089), Vir- tual reality systems(MS = 3.72, SD = 1.129), Smart building (MS = 3.69, SD = 1.109), Machine learning (MS = 3.69, SD = 1.204), Laser scan- ner (MS = 3.64, SD = 1.142), Unmanned aerial vehicles (MS = 3.62, SD = 1.069), 3D printing (MS = 3.62, SD = 1.167), and lack of labor force (MS = 3.01, SD = 1.266) ranking least. Modular construction (MS = 3.59, SD = 1.097), Prefabrication (MS = 3.59, SD = 1.059), Site positioning systems (MS = 3.58, SD = 1.073), Cyber-physical systems (MS = 3.58, SD = 1.194), Augmented reality (MS = 3.58, SD = 1.123), Blockchain (MS = 3.55, SD = 1.136). the results reveal that the pandemic prompted the adoption of technologies and platforms that promote less physical human interaction. It is not surprising that the adoption of IoT technology is ranked first. This enables the connection of physical objects through embedded sensors for data exchange over the internet. The results also revealed that the pandemic prompted BIM diffusion more. This is because collaborative working was necessary virtually, and BIM provides this platform.

Table 2. Adopted technologies.

Table available in the original PDF paper.

Emerging technologies Mean Std. Deviation Internet of things 3.93 1.090 Building information modelling 3.88 1.046 Cloud-based systems 3.86 1.051 Drones 3.85 1.016 Data Collection Apps 3.80 1.158 Artificial intelligence 3.77 1.165 Building management systems 3.74 1.159 Big Data 3.73 1.126 Radio-frequency identification 3.73 1.089 Virtual Reality systems 3.72 1.129 Smart building 3.69 1.109 Machine learning 3.69 1.204 Laser scanner 3.64 1.142 Unmanned aerial vehicles 3.62 1.069 3D printing 3.62 1.167 Modular construction 3.59 1.097 Prefabrication 3.59 1.059 Site positioning systems 3.58 1.073 Cyber-physical systems 3.58 1.194 Augmented reality 3.58 1.123 Blockchain technology 3.55 1.136

Beyond the Lockdowns: Investigating the Impact of Covid on Technology Adoption 329

Table 2 presents the factor analysis of the collected data. A Kaiser- Meyer-Olkin Measure of Sampling Adequacy test achieved a value of 0.902, revealing that the data is considered adequate for factor analysis. The fac- tor analysis shows two clusters; cluster one consists of Artificial intelligence, Building information modelling, Drones, Blockchain technology, 3D printing, Virtual Reality systems, Radio-frequency identification, Internet of things, Cloud-based systems, Augmented reality, Cyber-physical systems, Unmanned aerial vehicles, Modular construction and Prefabrication. Meanwhile, the second cluster is made up of Laser scanner, Site positioning systems, Big Data, Machine learning, Smart building, Building management systems and Data Collection Apps. Cluster one is mostly technologies adopted at vari- ous aspects of the construction process to achieve productivity, monitoring, safety and efficiency. Hence, they are broadly termed construction technolo- gies. Cluster two is focused more on data( collection, analysis and science). Thus, the second cluster is termed smart building technologies, as they can be adopted to automate and optimize building operations.

Table 3. Factor analysis of technologies.

Table available in the original PDF paper.

The result shows that the construction industry, especially in develop- ing countries, is becoming more aware of the technology adoption trend, although it is not at par yet with the developed countries (Adekunle, Aigbavboa et al., 2021; Adekunle, Ejohwomu et al., 2021). It also shows

that continuous efforts are being made to adopt emerging technologies in the construction industry, although at different levels. It is not surprising that BIM is highly ranked; it has been a front burner in terms of diffusion efforts in the construction industry. Due to its inherent advantage of providing real- time collaboration, it is thus an important technology considering the various measures implemented during the pandemic. Several studies have been con- ducted in South Africa to understand and further BIM diffusion in the South African construction industry (Adekunle et al., 2022; Adekunle et al., 2024; Akintola et al., 2017; Chimhundu, 2015; Kekana et al., 2015; Odubiyi et al., 2019; Olugboyega & Windapo, 2021; Otasowie et al., 2023). As regards the ranking of blockchain technology ranking least, it is also not surprising as many are not well aware of it yet. This is due to its status as a new technology (Akinradewo et al., 2022). It thus requires more awareness of its capabilities among professionals to achieve widespread adoption.

CONCLUSION

This study identified the emerging technologies in the construction indus- try and how the COVID-19 pandemic informed their adoption. Through a quantitative approach, the study identified and ranked the technologies. The findings reveal that various technologies were adopted during the pan- demic in order to overcome its impacts. The study clustered the technologies into construction technologies and smart building technologies. The study reveals that the construction industry adopted diverse technologies due to the pandemic constraint of physical distancing and lockdowns.

It is, therefore, evident that the pandemic, beyond its negative impacts, is a driver of technology adoption in the construction industry in develop- ing countries. Although at different rates, the construction industry achieved more in terms of technology adoption as there was the need to overcome the many challenges and measures implemented to overcome the pandemic. This study was conducted in South Africa and only identified the technolo- gies and platforms adopted due to the pandemic. Other studies can conduct further studies on the level of impact of these technologies on construction productivity. Also, further studies can be conducted comparing the pre and post-pandemic status of the construction industry in terms of technology adoption.

REFERENCES

Adekunle, S., Aigbavboa, C., Akinradewo, O., Ikuabe, M., & Adeniyi, A. (2022).

A principal component analysis of Organisational BIM Implementation. Modular and Offsite Construction (MOC) Summit Proceedings, 161–168. https://doi.org/ 10.29173/MOCS278 Adekunle, Samuel A., Aigbavboa, C. O., Ejohwomu, O. A., Ogunbayo, B. F., & Ikuabe, M. (2023). Intricacies and lifeline for the construction industry amidst the coronavirus pandemic. Construction Safety, Health and Well-Being in the COVID-19 Era, 243–257. https://doi.org/10.1201/9781003278368-21 Adekunle, Samuel Adeniyi, Aigbavboa, C. O., & Ejohwomu, O. A. (2022). Under-

standing the BIM actor role: a study of employer and employee preference and availability in the construction industry. Engineering, Construction and Architectural Management. https://doi.org/10.1108/ECAM-08-2021-0714

Beyond the Lockdowns: Investigating the Impact of Covid on Technology Adoption 331

Adekunle, Samuel Adeniyi, Aigbavboa, C. O., Ejohwomu, O., Adekunle, E. A., & Thwala, W. D. (2021). Digital transformation in the construction industry : a bib- liometric review. Journal of Engineering, Design and Technology, 2013, 1–29. https://doi.org/10.1108/JEDT-08-2021-0442 Adekunle, Samuel Adeniyi, Ejohwomu, O., & Aigbavboa, C. O. (2021). Build-

ing Information Modelling Diffusion Research in Developing Countries: A User Meta-Model Approach. Buildings, 11(7), 264. https://doi.org/10.3390/building s11070264 Adekunle, Samuel Adeniyi, Ejohwomu, O., Aigbavboa, C., Ikuabe, M., Ogunbayo, B., & John, I. B. (2024). Achieving Macro-Level Bim Adoption in the South African Construction Industry: Key Stakeholders and Constraints. 545–552. https://doi.org/10.1007/978-3-031-35399-4_39 Akinradewo, O. I., Aigbavboa, C. O., Edwards, D. J., & Oke, A. E. (2022).

A principal component analysis of barriers to the implementation of blockchain technology in the South African built environment Principal component analysis of barriers. Journal of Engineering, Design and Technology. https://doi.org/10. 1108/JEDT-05-2021-0292 Akintola, A., Root, D., & Venkatachalam, S. (2017). Key Constraints to Optimal and Widespread Implementation of BIM in the South African Construction Indus- try. Proceeding of the 33rd Annual ARCOM Conference, 4–6 September 2017, 25–34. https://www.arcom.ac.uk/-docs/proceedings/fd7c938fcee1ffc085f098c3b 88f8c34.pdf Aliu, J., Aghimien, D., Aigbavboa, C., Ebekozien, A., Oke, A. E., Adekunle,

S. A., Akinradewo, O., & Akinshipe, O. (2022). Developing emotionally compe- tent engineers for the ever-changing built environment. Engineering Construction and Architectural Management. https://doi.org/10.1108/ECAM-08-2022-0806 Alsharef, A., Banerjee, S., Uddin, S. M. J., Albert, A., & Jaselskis, E. (2021). Early impacts of the COVID-19 pandemic on the United States construction industry. International Journal of Environmental Research and Public Health, 18(4), 1–21. https://doi.org/10.3390/IJERPH18041559 Araya, F. (2021). Modeling the spread of COVID-19 on construction workers: An

agent-based approach. Safety Science, 133. https://doi.org/10.1016/j.ssci.2020. 105022 Bsisu, K. A. D. (2020). The impact of COVID-19 pandemic on Jordanian civil engineers and construction industry. International Journal of Engineering Research and Technology, 13(5), 828–830. https://doi.org/10.37624/IJERT/13.5.2020. 828-830 Cabanesas, A. J. A., Cabanesas, R. M., Padilla, J. M., MANZON, R. D. S., &

LORIA, S. A. J. (2021). New Normal in the Construction Industry a Covid-19 Effect. Engineering And Technology Journal, 6(5), 873–878. https://doi.org/10. 47191/ETJ/V6I5.01 Chimhundu, S. (2015). A study on the BIM adoption readiness and possible mandatory initiatives for successful implementation in South Africa. University of the Witwatersrand, Johannesburg. Denny-Smith, G., Sunindijo, R. Y., Loosemore, M., Williams, M., & Piggott, L.

(2021). How construction employment can create social value and assist recovery from covid-19. Sustainability (Switzerland), 13(2), 1–20. https://doi.org/10.3390/ SU13020988 Ebekozien, A., & Aigbavboa, C. (2021). COVID-19 recovery for the Nigerian construction sites: The role of the fourth industrial revolution technologies. Sustain- able Cities and Society, 69, 102803. https://doi.org/10.1016/J. SCS.2021.102803

Ejohwomu, O., Adekunle, S. A., Aigbavboa, O. C., & Bukoye, T. (2021). Construction and Fourth Industrial Revolution: Issues and Strategies. In P. (Edi- tor) Emmanuel Adinyira, PhD (Editor), Kofi Agyekum (Ed.), The Construction Industry: Global Trends, Job Burnout and Safety Issues. (First). Nova Science Publishers. https://doi.org/https://doi.org/10.52305/JDFM1229 Esa, M. B., Ibrahim, F. S. B., & Kamal, E. B. M. (2020). Covid-19 pandemic

lockdown: The consequences towards project success in malaysian construc- tion industry. Advances in Science, Technology and Engineering Systems, 5(5), 973–983. https://doi.org/10.25046/AJ0505119 Gamil, Y., & Alhagar, A. (2020). The Impact of Pandemic Crisis on the Survival of Construction Industry: A Case of COVID-19. Mediterranean Journal of Social Sciences, 11(4), 122. https://doi.org/10.36941/MJSS-2020-0047 Gamil, Y., & Alhagar, A. (2021). The Impact of Pandemic Crisis on the Survival of

Construction Industry: A Case of COVID-19. Journal of Management in Engineer- ing, 37(3), 06021001. https://doi.org/10.1061/(ASCE) ME.1943–5479.0000906 Han, E., Tan, M. M. J., Turk, E., Sridhar, D., Leung, G. M., Shibuya, K., Asgari, N., Oh, J., García-Basteiro, A. L., Hanefeld, J., Cook, A. R., Hsu, L. Y., Teo, Y. Y., Heymann, D., Clark, H., McKee, M., & Legido-Quigley, H. (2020). Lessons learnt from easing COVID-19 restrictions: an analysis of coun- tries and regions in Asia Pacific and Europe. The Lancet, 396(10261), 1525–1534. https://doi.org/10.1016/S0140-6736(20)32007-9 Hansen, S. (2020). Does the COVID-19 Outbreak Constitute a Force Majeure Event?

A Pandemic Impact on Construction Contracts. Journal of the Civil Engineering Forum, 6(1), 201. https://doi.org/10.22146/JCEF.54997 Ikuabe, M., Aigbavboa, C., Akinradewo, O., Adekunle, S., & Adeniyi, A. (2022).

Hindering factors to the utilisation of UAVs for construction projects in South Africa. Modular and Offsite Construction (MOC) Summit Proceedings, 154–160. https://doi.org/10.29173/MOCS277 Jamaludin, S., Azmir, N. A., Mohamad Ayob, A. F., & Zainal, N. (2020). COVID- 19 exit strategy: Transitioning towards a new normal. Annals of Medicine and Surgery, 59, 165–170. https://doi.org/10.1016/J. AMSU.2020.09.046 Kekana, G., Aigbavboa, C., & Thwala, W. (2015). Understanding Building Infor-

mation Modelling in the South Africa construction industry. 12th International OTMC Conference: Organisation, Technology and Management in Construction, September 2015. Majumder, S., & Biswas, D. (2021). COVID-19 Impacts Construction Industry: Now, then and Future. Lecture Notes on Data Engineering and Communications Technologies, 60, 115–125. https://doi.org/10.1007/978-981-15-9682-7_13 Odubiyi, T. B., Aigbavboa, C., Thwala, W., & Netshidane, N. (2019). Strategies

for Building Information Modelling Adoption in the South African Construc- tion Industry. Modular and Offsite Construction (MOC) Summit Proceedings, 514–519. https://doi.org/10.29173/mocs133 Oladiran, O.., & Onatayo, D. (2019). Labour productivity: Perception of site managers on building projects. LAUTECH Journal of Civil and Environmental Studies, 2(Issue 1). https://doi.org/10.36108/LAUJOCES/9102/20(0110) Olugboyega, O., & Windapo, A. O. (2021). Structural equation model of the barriers

to preliminary and sustained BIM adoption in a developing country. Construction Innovation, 1471–4175. https://doi.org/10.1108/CI-04-2021-0061 Otasowie, K., Aigbavboa, C., Ikuabe, M., Adekunle, P., Oke, A., & Adekunle, S.

(2023). Barriers to the Adoption of Building Information Modeling in Quantity Surveying Practice in South Africa. Proceedings of the 31st Annual Conference of the International Group for Lean Construction (IGLC31), 41–49. https://doi.or g/10.24928/2023/0137

Beyond the Lockdowns: Investigating the Impact of Covid on Technology Adoption 333

Pamidimukkala, A., & Kermanshachi, S. (2021). Impact of Covid-19 on field and office workforce in construction industry. Project Leadership and Society, 2, 100018. https://doi.org/10.1016/J. PLAS.2021.100018 Salami, B. A., Ajayi, S. O., & Oyegoke, A. S. (2021). Tackling the impacts of Covid-

19 on construction projects: an exploration of contractual dispute avoidance measures adopted by construction firms. International Journal of Construction Management. https://doi.org/10.1080/15623599.2021.1963561

Cover of the proceedings volume Emerging Technologies and Future of Work

Explore the complete digital volume

Emerging Technologies and Future of Work

Read this individual research paper free through the original publisher, or explore the full digital proceedings book.

ISBN 978-1-958651-93-3

Explore this ISBN in the AHFE Bookstore Listed in the July 2026 bookstore catalogue; search by ISBN to confirm current availability · Digital book purchase optional

Explore Related Research

Related research 8 matches

More papers from this volume

← Back to Research ExplorerBrowse the full library →