Skip to article
AHFE AHFE Discoveries AHFE International Open Access Journal
AHFE OPEN ACCESS OPEN ACCESS CONFERENCE PROCEEDINGS PAPER

Serbian and Libyan Anthropometric Measurements Data in Contemporary Systems’ Design

1 University of Belgrade - Faculty of Mechanical Engineering, Kraljice Marije 16, 11120, Belgrade 35, Serbia ↗
2 Misurata University, Faculty of Engineering, 2478 Misrata, Libya ↗
Publication year
Digital Object Identifier10.54941/ahfe1002161

Abstract

It is known that the study of the interactions of a person and a machine in a system, in terms of its improvement and further adjustments in order to improve the efficiency of functioning, reduce fatigue, preserve human health and ensure optimum working environment, is still a challenge for constructors as well as other experts who deal with this problem. In contemporary contexts it is even more important is to provide equal consideration of the human along with the hardware and software in the technical and technical management processes for developing systems that will optimize total system performance and minimize total ownership costs. The aim of this paper is to compare Serbian and Libyan anthropometric measurements, such as foot length, standing height, sitting height, lower leg length, upper leg length, shoulder width, hip breadth, arm length and body weight, on the basis of samples of 1197 Serbians and 400 Libyans which have been collected. Further statistical analysis have been conducted to explore the effect of large mixed data on the anthropometric measurements, and their patterns, which facilitates the interior space design of vehicles and cabins used by both males and females, in order to establish a model that could be fit to multi-users. Descriptive statistics includes sample sizes, means, medians, minimal and maximal values with their ranges, coefficient of variation and Kolmogorov test for normality. Since all measurements were parametric, this enabled conducting the linear regression and correlation analysis, which include coefficient of correlations, coefficients of determination, as well as significance of regression and correlations. In order to compare anthropometric measurements between different nationalities, for all examined groups of participants, the Z tests for difference of means were conducted between Serbian and Libyan samples. The correlation results show that the measurements of the sample for the Serbian population have more statistically significant correlations than the Libyan sample has. Serbian sample have significant differences only in three measurements while there were reverse results for the Libyan sample. The arm length and lower leg length have no significant differences in either samples, and the standing height in both samples have an absolute difference (p value =0). Absolute, significant differences were found between all compared anthropometric measurements at a significance level of p<0.001. Body weight showed a strong significance difference at level of p<0.01 (p-value=0.0052) while shoulder width had no significant difference (p-value=0.3132). The mean and median values and z test results show that the Serbian sample has higher values than the Libyan sample, excluding for shoulder width which has very close values. Since the compatibility of the anthropometric characteristics of the driver/operator of the vehicle and/or machinery with other space dimensions, as well as the dimensions and position of the equipment in the cabin, directly affects the user from the aspect of comfort, health and working ability, results of this study could be useful for its designers in aim to influence the performance, productivity and financial losses as well as safety performance, in a very broad scope.

INTRODUCTION

It is very important to determine how, and to what extent, people vary in order to ensure that products and environments are designed to fit as many people as possible (Masson et al., 2015, Lima et al., 2015). The study of the interactions of a person and a machine in a system, in terms of its improvement and further adjustments in order to improve the efficiency of functioning, reduce fatigue, preserve human health and ensure optimum wor- king environment, is still a challenge for designers and constructors as well as other experts who deal with this problem. In contemporary contexts it is even more important is to provide equal consideration of the human along with the hardware and software in the technical and technical management processes for developing systems that will optimize total system performance

© 2022. Published by AHFE Open Access. All rights reserved. 242

Serbian and Libyan Anthropometric Measurements Data 243

and minimize total ownership costs. It is well known that anthropometric measurements depend on gender, race, age, occupation (Zhuang et al., 2010, Beydoun and Wang, 2009), nationality, and nutrition (Castellucci et al., 2019, Fatollahzadeh, 2006; Mandahawi et al., 2008). For instance, a study aimed at updating the aircraft seating standards concluded that there were changes in anthropometric characteristics over time, so seat dimensions need to be revi- ewed in order to provide adequate accommodation for contemporary frames (Quigley et al., 2001). Quigley et al. (2001) have also provided the percentiles values of anthropometric data of the nationalities of Europe, on the one hand and Japan, China and the U.S., on the other, to show the various differences in the standing height, body weight, etc., between European nationalities, and other nationalities. Consequently, the nationality and gender disparities are recommended to be further studied (Beydoun, and Wang, 2009). With that goal, for instance, Guan et al. (2012) have noted that anthropometric measu- rements (that represent width) also change over time across a 25-year period. This has also been confirmed by Klarin et al. (2011). Klarin et al. (2011) have shown that the height of drivers has increased, whereas other dimensions, i.e. foot length, shoulder width, and hip width have varied too in this time frame. Therefore, the use of up-to-date anthropometric data is recommended (Brki´c et al., 2015, Castellucci et al., 2019, Kim et al., 2017, Maukonen et al., 2018, Dianat et al., 2018) in contemporary design issues, and gender, nationality and occupation also have vital importance in anthropometric measurements analysis and in design as well.

Serbian and Libyan anthropometric data are very rarely available (Brkic et al., 2021, Veljkovic et al., 2020, Essdai et al., 2018, Altaboli et al., 2019), so this study focuses on those data collection and comparison. Accordin- gly, the aim of this paper is to compare Serbian and Libyan anthropometric measurements, such as foot length, standing height, sitting height, lower leg length, upper leg length, shoulder width, hip breadth, arm length and body weight.

STATISTICAL EXAMINATION OF ANTHROPOMETRIC DATA FOR SERBIAN AND LIBYAN PARTICIPANTS Samples of anthropometric data of 1197 Serbians and 400 Libyans have been collected. In both samples were both male and female drivers and crane operators. Further statistical analysis is conducted to explore the effect of large mixed data on the anthropometric measurements, and their patterns, which facilitates further anthropometric adaptation of different devices, workplaces etc.

Descriptive Statistics As can be seen from Table 1 and 2, the mean and median values show that the Serbian sample has higher values than the Libyan sample, excluding shoulder width which has very close values, meaning that the Serbian sample has larger anthropometric measurements than the Libyan sample has.

Table 1. Descriptive statistics for Serbians participants.

Table available in the original PDF paper.

Dimension N Mean Med. Min. Max. R SD cv (%) D p SIG. VT WEI 1197 83.100 84 45 125 80 13.980 16.82 0.2350 1 n.s. parameter

STH 1197 1789.428 1780 1520 1995 475 84.078 4.70 0.2055 1 n.s. parameter SIH 1197 908.287 910 560 1020 460 50.969 5.61 0.1527 1 n.s. parameter LLL 1197 587.329 590 370 770 400 38.476 6.55 0.2372 1 n.s. parameter

ULL 1197 627.950 625 384 800 416 48.519 7.73 0.1923 1 n.s. parameter SHW 1197 462.367 460 358 630 272 50.106 10.84 0.2013 1 n.s. parameter HIB 1197 388.409 390 290 590 300 45.522 11.72 0.3028 <0.200 n.s. parameter

ARL 1197 697.601 700 410 830 420 50.757 7.28 0.1821 1 n.s. parameter FOL 1197 277.578 275 225 321 96 18.013 6.49 0.1879 1 n.s. parameter

Table 2. Descriptive statistics for Libyans participants.

Table available in the original PDF paper.

Dimension N Mean Med. Min. Max. R SD cv (%) D p SIG. VT WEI 400 81.163 80.0 44 125 81 13.614 16.77 0.139 1 n.s. Parameter

STH 400 1732.785 1740.0 1510 1900 390 68.492 3.95 0.232 1 n.s. Parameter SIH 400 848.338 850.0 670 970 300 50.198 5.92 0.194 1 n.s. Parameter LLL 400 538.213 540.0 450 670 220 36.950 6.87 0.159 1 n.s. Parameter

ULL 400 577.675 580.0 490 720 230 38.223 6.62 0.219 1 n.s. Parameter SHW 400 464.988 467.5 340 640 300 51.083 10.99 0.252 1 n.s. Parameter HIB 400 370.290 360.0 230 570 340 55.847 15.08 0.157 1 n.s. Parameter

ARL 400 632.265 620.0 450 800 350 70.345 11.13 0.196 1 n.s. Parameter FOL 400 272.64 275.0 230 300 70 12.374 4.54 0.252 1 n.s. Parameter

Correlation Between Anthropometric Measurement for all Serbian and Libyan Participants The correlation results show that the measurements of the sample for the Serbian population have more statistically significant correlations than the Libyan sample has, as in Tables 3 and 4.

Comparison of Means Between Anthropometric Measurements of Serbian and Libyan Participants This comparison was done in order to investigate and verify the effect of the mixed gender and occupation selection on the anthropometric measurements with nationality as the only difference. Absolute, significant differences were again found between all compared anthropometric measurements at a signi- ficance level of p<0.001, with p-values = 0. Body weight showed a strong significance difference at level of p<0.01 (p-value = 0.0052), and shoulder width again had no significant difference with p-value = 0.3132. The test indicates that the Serbian sample has larger anthropometric measurements than the Libyan sample, while there are no significant differences for shoulder

Serbian and Libyan Anthropometric Measurements Data 245

Table 3. The correlations between anthropometric measurements of all Serbian participants.

Table available in the original PDF paper.

Comparison R r2 (%) SIG. Comparison r r2 (%) SIG.

WEI vs. STH 0.561 31.47 * SIH vs. LLL 0.495 24.50 n.s. WEI vs. SIH 0.403 16.24 n.s. SIH vs. ULL 0.419 17.56 n.s. WEI vs. LLL 0.443 19.62 n.s. SIH vs. SHW 0.353 12.46 n.s. WEI vs. ULL 0.463 21.44 n.s. SIH vs. HIB 0.043 0.18 n.s. WEI vs. SHW 0.569 32.38 * SIH vs. ARL 0.611 37.33 * WEI vs. HIB 0.537 28.84 * SIH vs. FOL 0.442 19.54 n.s. WEI vs. ARL 0.435 18.92 n.s. LLL vs. ULL 0.681 46.38 * WEI vs. FOL 0.588 34.57 * LLLL vs. SHW 0.383 14.67 n.s. STH vs. SIH 0.738 54.46 ** LLL vs. HIB 0.209 4.37 n.s. STH vs. LLL 0.618 38.19 * LLL vs. ARL 0.565 31.92 * STH vs. ULL 0.572 32.72 * LLL vs. FOL 0.462 21.34 n.s. STH vs. SHW 0.415 17.22 n.s. ULL vs. SHW 0.450 20.25 n.s. STH vs. HIB 0.518 26.83 * ULL vs. HIB 0.281 7.90 n.s. STH vs. ARL 0.621 38.56 * ULL vs. ARL 0.543 29.48 * STH vs. FOL 0.644 41.47 * ULL vs. FOL 0.450 20.25 n.s. ARL vs. FOL 0.488 23.81 n.s. SHW vs. HIB 0.630 39.69 * HIB vs. ARL 0.171 2.92 n.s. SHW vs. ARL 0.452 20.43 n.s. HIB vs. FOL 0.251 6.30 n.s. SHW vs. FOL 0.413 17.06 n.s.

Table 4. The correlations between anthropometric measurements of all Libyan participants.

Table available in the original PDF paper.

Comparison R r2 (%) SIG. Comparison r r2 (%) SIG.

WEI vs. STH 0.267 7.13 n.s. SIH vs. LLL 0.320 10.24 n.s. WEI vs. SIH 0.202 4.08 n.s. SIH vs. ULL 0.302 9.12 n.s. WEI vs. LLL 0.278 7.73 n.s. SIH vs. SHW 0.130 1.69 n.s. WEI vs. ULL 0.278 7.73 n.s. SIH vs. HIB 0.039 0.15 n.s. WEI vs. SHW 0.509 25.91 * SIH vs. ARL 0.175 3.06 n.s. WEI vs. HIB 0.375 14.06 n.s. SIH vs. FOL 0.271 7.34 n.s. WE vs. ARL 0.070 0.49 n.s. LLL vs. ULL 0.692 47.89 * WEI vs. FOL 0.395 15.60 n.s. LLL vs. SHW 0.348 12.11 n.s. STH vs. SIH 0.563 31.70 * LLL vs. HIB 0.179 3.20 n.s. STH vs. LLL 0.584 34.11 * LLL vs. ARL 0.165 2.72 n.s. STH vs. ULL 0.551 30.36 * LLL vs. FOL 0.420 17.64 n.s. STH vs. SHW 0.248 6.15 n.s. ULL vs. SHW 0.241 5.81 n.s. STH vs. HIB 0.040 0.16 n.s. ULL vs. HIB 0.184 3.42 n.s. STH vs. ARL 0.146 2.13 n.s. ULL vs. ARL 0.138 1.90 n.s. STH vs. FOL 0.510 26.01 * ULL vs. FOL 0.294 8.64 n.s. ARL vs. FOL 0.020 0.04 n.s. SHW vs. HIB 0.483 23.33 n.s. HIB vs. ARL 0.243 5.90 n.s. SHW vs. ARL 0.178 3.17 n.s. HIB vs. FOL 0.001 0.00 n.s. SHW vs. FOL 0.355 12.60 n.s.

width, as shown in Table 5. Data also gave opportunity to test gender differe- nces on drivers in both Serbia and Libya, as in Tables 6 and 7, where different pattern could be seen.

Table 5. Comparison between Serbian and Libyan participants.

Table available in the original PDF paper.

z test p value p WEI SR >> WEI LI 0.0052 p<0.01 STH SR >>> STH LI 0 p<0.001 SIH SR >>> SIH LI 0 p<0.001 LLL SR >>> LLL LI 0 p<0.001 ULL SR >>> ULL LI 0 p<0.001 SHW SR = SHW LI 0.3132 n.s. HIB SR >>> HIB LI 0 p<0.001 ARL SR >>> ARL LI 0 p<0.001 FOL SR >>> FOL LI 0 p<0.001

Table 6. Comparison between Serbian male drivers and Serbian female drivers.

Table available in the original PDF paper.

z test p value P WEI SMD >>> WEI SFD 0 p<0.001 STH SMD >>> STH SFD 0 p<0.001 SIH SMD >>> SIH SFD 0 p<0.001 LLL SMD >>> LLL SFD 0 p<0.001 ULL SMD >>> ULL SFD 0 p<0.001 SHW SMD >>> SHW SFD 0 p<0.001 HIB SMD >>>HIB SFD 0 p<0.001 ARL SMD >>> ARL SFD 0 p<0.001 FOL SMD >>> FOL SFD 0 p<0.001

Table 7. Comparison between Libyan male drivers and Libyan female drivers.

Table available in the original PDF paper.

z test p value P WEI LMD >>> WEI LFD 0 p<0.001 STH LMD >>> STH LFD 0 p<0.001 SIH LMD >> SIH LFD 0.0037 p<0.01 LLL LMD >>> LLL LFD 0 p<0.001 ULL LMD >> ULL LFD 0.0068 p<0.01 SHW LMD >>> SHW LFD 0 p<0.001 HIB LMD <<<HIB LFD 0.0002 p<0.001 ARL LMD > ARL LFD 0 p<0.05 FOL LMD >>> FOL LFD 0 p<0.001

CONCLUSION

The aim of this paper was to compare Serbian and Libyan anthropometric measurements, such as foot length, standing height, sitting height, lower leg length, upper leg length, shoulder width, hip breadth, arm length and body weight, on the basis of samples of 1197 Serbians and 400 Libyans which have been collected. Further statistical analysis have been conducted to explore the effect of large mixed data on the anthropometric measurements, and their

Serbian and Libyan Anthropometric Measurements Data 247

patterns, which facilitates the interior space design of vehicles and cabins used by both males and females, in order to establish a model that could be fit to multi-users. Descriptive statistics included sample sizes, means, medi- ans, minimal and maximal values with their ranges, coefficient of variation and Kolmogorov test for normality. Since all measurements were parametric, this enabled conducting the linear regression and correlation analysis, which include coefficient of correlations, coefficients of determination, as well as significance of regression and correlations. In order to compare anthropome- tric measurements between different nationalities, for all examined groups of participants, the Z tests for difference of means were conducted between Ser- bian and Libyan samples. The correlation results show that the measurements of the sample for the Serbian population have more statistically significant correlations than the Libyan sample has. Serbian sample have significant dif- ferences only in three measurements while there were reverse results for the Libyan sample. The arm length and lower leg length have no significant dif- ferences in either samples, and the standing height in both samples have an absolute difference (p value =0). Absolute, significant differences were found between all compared anthropometric measurements at a significance level of p<0.001. Body weight showed a strong significance difference at level of p<0.01 (p-value = 0.0052) while shoulder width had no significant difference (p-value = 0.3132). The mean and median values and z test results show that the Serbian sample has higher values than the Libyan sample, excluding for shoulder width which has very close values. Also, tested gender differences on drivers in the samples in Serbia and Libya, have shown different patterns.

Since the compatibility of the anthropometric characteristics of the drive- r/operator of the vehicle and/or machinery with other space dimensions, as well as the dimensions and position of the equipment in the cabin, directly affects the user from the aspect of comfort, health and working ability, results of this study could be useful for its designers in aim to influence the perfor- mance, productivity and financial losses as well as safety performance, in a very broad scope. Also, more research on other rarely available anthropome- tric data on certain other nationalities are needed, due to globalization trends and constant migrations and that is possible avenue for future research.

ACKNOWLEDGMENT

The paper is supported by grants from the Ministry of Education, Science and Technological Development, grants from projects E!13300, RESMOD and contract 451-03-68/2020-14/200105 (TR 35017).

REFERENCES Altaboli, A., Akrim, A., Omar, E., Hamad, F. and Ahmed, S. (2020) “Comparative Assessment of Classroom Desk Dimensions with Respect to Students Anthropo- metry for Females Middle Schools.” In R.S. Goonetilleke, and W. Karwowski, (eds.) Advances in Physical Ergonomics and Human Factors. Cham: Sprin- ger International Publishing (Advances in Intelligent Systems and Computing), 231–241. Beydoun, M.A. and Wang, Y. (2009), “Gender-ethnic Disparity in BMI and Waist

Circumference Distribution Shifts in US Adults”, Obesity, 17(1), 169–176.

Brki´c, A., Veljkovi´c, Z., Spasojevi´c Brki´c, V., Essdai, A. and Pavi´cevi´c, S. (2021), “Differences in Serbian and Libyan crane operators’ anthropometric measurements and cabin interior space modeling.” Work, 68(1), 197–212. Castellucci, H. I., Viviani, C. A., Molenbroek, J. F. M., Arezes, P. M., Martínez, M.,

Aparici, V., & Bragança, S. (2019), “Anthropometric characteristics of Chilean workers for ergonomic and design purposes”. Ergonomics, 62(3), 459–474. Dianat, I., Molenbroek, J. and Castellucci, H.I. (2018), “A review of the methodology and applications of anthropometry in ergonomics and product design.” Ergonomics, 61(12), 1696–1720. Essdai, A., Spasojevi´c Brki´c, V.K., Golubovi´c, T., Brki´c, A. and Popovi´c, V. (2018),

“Crane cabins’ interior space multivariate anthropometric modeling.” Work, 59(4), 557–570. Fatollahzadeh, K. (2006), “A laboratory vehicle mock-up research work on truck driver’s selected seat position and posture: A mathematical model approach with respect to anthropometry, body landmark locations and discomfort.” KTH, (Doctoral thesis). Guan, J., Hsiao, H., Bradtmiller, B., Kau, T.-Y., Reed, M.R., Jahns, S.K., Loczi,

J., Hardee, H.L. and Piamonte, D.P.T. (2012), “U.S. Truck Driver Anthropome- tric Study and Multivariate Anthropometric Models for Cab Designs.” Human Factors, 54(5), 849–871. Kim, J. Y., You, J. W., & Kim, M. S. (2017), “South Korean anthropometric data and survey methodology:’Size Korea’project”. Ergonomics, 60(11), 1586–1596. Klarin, M.M., Spasojevi´c-Brki´c, V.K., Sajfert, Z.D., Djordjevi´c, D.B., Nikoli´c, M.S.

and ´Co´ckalo, D.Z. (2011), “Determining the width of the optimal space needed to accommodate the drivers of passenger vehicles using the analogy of anthropo- metric measurement dynamics and mechanical mechanisms.” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225(4), 425–440. Lima, R., Fontes, L., Arezes, P. and Carvalho, M. (2015), “Ergonomics, Anthropometrics, and Kinetic Evaluation of Gait: A Case Study.” Procedia Manufacturing, 3, 4370–4376. Mandahawi, N., Imrhan, S., Al-Shobaki, S. and Sarder, B. (2008), “Hand anthropo-

metry survey for the Jordanian population”. International Journal of Industrial Ergonomics, 38(11-12), 966–976. Masson, A.E., Hignett, S. and Gyi, D.E. (2015), “Anthropometric Study to Understand Body Size and Shape for Plus Size People at Work”, Procedia Manufacturing, 3, 5647–5654. Maukonen, M., Männistö, S. and Tolonen, H. (2018), “A comparison of measured

versus self-reported anthropometrics for assessing obesity in adults: a literature review.” Scandinavian Journal of Public Health, 46(5), 565–579. Quigley, C., Southall, D., Freer, M., Moody, A. and Porter, M. (2001), ‘Anthropometric study to update minimum aircraft seating standards’. Spasojevi´c Brki´c, V.K., Klarin, M.M. and Brki´c, A.Dj. (2015), “Ergonomic design of

crane cabin interior: The path to improved safety.” Safety Science, 73, 43–51. Veljkovi´c, Z., Brki´c, A., Spasojevic Brki´c, V., Klarin, M., Essdai, A. and Stanisavljev, S. (2020), “Differences between the Anthropometric Measurements of Serbian and Libyan Male Passenger Car Drivers.” Mathematical Problems in Engineering, 2020, e9167589. Zhuang, Z., Landsittel, D., Benson, S., Roberge, R. and Shaffer, R. (2010), “Facial

Anthropometric Differences among Gender, Ethnicity, and Age Groups.” The Annals of Occupational Hygiene, 54(4), 391–402.

Cover of the proceedings volume Human Factors and Systems Interaction

Explore the complete digital volume

Human Factors and Systems Interaction

Read this individual research paper free through the original publisher, or explore the full digital proceedings book.

ISBN 978-1-958651-28-5

Explore this ISBN in the AHFE Bookstore Listed in the July 2026 bookstore catalogue; search by ISBN to confirm current availability · Digital book purchase optional

Explore Related Research

Related research 8 matches

More papers from this volume

← Back to Research ExplorerBrowse the full library →