Skip to article
AHFE AHFE Discoveries AHFE International Open Access Journal
AHFE OPEN ACCESS OPEN ACCESS CONFERENCE PROCEEDINGS PAPER

Backhoe and Loader Excavator Operators’ Workplace Health and Safety and Gaseous Pollutants

1 University of Belgrade – Faculty of Mechanical Engineering, Belgrade, Serbia ↗
2 University of Belgrade – Faculty of Mechanical Engineering, Belgrade, Serbia; General Electricity Company of Lybia, Tripoli, Lybia ↗
Publication year
Digital Object Identifier10.54941/ahfe1007983

Abstract

Operating heavy machinery is both physically and mentally very demanding job, which still carries significant risks, especially at excavators, even with the current regulations in place. Given that working conditions have a substantial impact on the health and safety of both employees and local inhabitants of mining industry sites, it seems imperative to enhance them. The first part of this research surveys 45 backhoe and 22 loader excavator operators’ attitudes regarding their satisfaction about health and safety at workplace and gaseous pollutants, while the second measures gaseous pollutants levels in machines operation and compares it to regulation documents. The findings of gaseous pollutants’ measurements demonstrate that, even with new machines, there are occurrences where specific working condition parameters are exceeded. Mann-Whitney tests confirmed statistically significant differences between backhoe and loader excavator working conditions regarding measured average O2, NO and CO2, average overrun of NOx and relation between maximum relative value measured of NOx and allowed value in regulation documents, because the backhoe excavators have higher values of the examined parameters. The findings also show greater satisfaction of loader excavator operators, as Mann-Whitney tests confirmed statistically significant differences regarding importance of satisfaction with working environmental conditions, the air quality in the working environment and operators’ knowledge to maintain or improve health and safety. It is evident that the workplace of loader excavator operator has lower human health and safety risk levels then backhoe excavator operator workplace. The proposal for future research is deeper analysis of causes of those differences.

INTRODUCTION

Due to its inherent features such as humidity, dust exposure, the risk of damage from falling rocks, falls from different levels, etc., the mining operation is both a significant economic sector in national economies and also one of the riskiest sectors (Sanmiquel et al., 2018; Čelebić et al., 2024). Open pit mines use a conventional cone-shaped excavation to extract minerals from near-surface, nonselective, low-grade zones, which frequently leads to great productivity, low operating costs, and significant capital investments Received February 11, 2026; Revised April 1, 2026; Accepted April 20, 2026; Available online July 20, 2026

(Altiti et al., 2021). Mining machinery used in open pit mining is designed for 40 to 50 years of operation (Czmochowski & Pietrusiak, 2012). Open- pit mines provide for the majority of Serbia’s electrical power generation in terms of energy balance (Brkic et al., 2014).

Operating any heavy machinery still carries significant risks, even with the current regulations in place (Duarte et al., 2021; Spasojevic Brkic et al., 2023). Cash benefits payable under relevant legislation, medical benefits, disability benefits, etc. payable under the social security system, and other benefits payable under the business’s own plan make up the direct cost of possible accidents (Arango-Retamozo et al., 2023). The time lost by injured workers, the time lost by other workers who stop work to help the injured worker, the time spent by first-aid attendants and hospital department staff, the cost of damage to machines, tools, or other property, the loss of profit due to the injured worker’s decreased productivity and efficiency, etc. are all examples of the indirect costs associated with mine accidents (Nowrouzi- Kia et al., 2017). According to earlier research, human mistake accounts for more than 80% of all undesirable incidents involving mining equipment (Mirzaei Aliabadi et al., 2020). In EU15 Member States, workplace accidents in the mineral-extraction sector were projected to have cost 454,909,000 euros (Ural & Demirkol, 2008).

One of the most widely utilized heavy machinery is the excavator, while workplaces of backhoe and loader excavator operators are recognized as a physically and mentally very demanding jobs (McCann, 2006; Palega & Rydz, 2018). Given that working conditions have a substantial impact on the health and safety of both employees and local inhabitants of mining industry sites, it seems imperative to enhance them (Bettens et al., 2022; McCann, 2006). More research is needed in that field, so the structure of this paper starts with literature review, which indicates the actuality and insufficient research of the topic of the paper, continues with survey methodology section, and is followed by results and conclusions.

PREVIOUS RESEARCH In the mining sector, excavators’ operational efficiency is crucial since it directly affects project schedules and financial results (Kassem et al., 2021).

The operator of an excavator faces numerous risks associated with both the machine’s operation and the workplace (Brkić et al., 2026; Kekeç et al., 2023; Palega & Rydz, 2018). An excavator operator must be perceptive, have constant focus, be precise, and have upper and lower limb dexterity in order to perform their hard and exhausting job. The excavator operator is subject to fluctuating weather conditions because they operate both inside and outside the cabin (Palega & Rydz, 2018). It should be underlined that the quality of the work completed and the working circumstances are significantly impacted by the ambient temperature, too (Palega & Rydz, 2018). One or three shifts are used for working at excavator. Noise, vibration, air dust, explosions, fire, and electric shock are just a few of the hazardous and damaging elements that an excavator operator may encounter (Palega & Rydz, 2018). Additionally, the excavator operator’s work is linked to health

Backhoe and Loader Excavator Operators’ Workplace 119 risks related to rheumatic and musculoskeletal disorders (Palega & Rydz, 2018; Perišić et al., 2024; Spasojević Brkić et al., 2024). The studies by Edwards et al., (2002) and Spasojević Brkić et al., (2022a) concentrate on risk management and cost prediction while examining the effects of excavator downtime in the mining sector. Lee et al. (2019) demonstrate an autonomous excavator system that uses remote controls and 3D scanning to securely operate in hazardous regions, potentially minimizing downtime associated to health and safety.

One of the main causes of air pollution is non-road mobile machinery (NRMM) (Waluś et al., 2018). Excavators require particular attention because the emission characteristics of mobile air pollution sources from the non-road sector have not yet been fully studied (Jung et al., 2020; Khan et al., 2023). However, existing techniques for predicting multi-pollutant emissions factors are imperfect, and nothing is known about how NRMM emissions are affected by real-world testing settings. (Wang et al., 2024).

To fulfill the research gap, this research is composed of two parts, the first of which surveys backhoe and loader excavator operators’ attitudes regarding their satisfaction about health and safety at workplace and gaseous pollutants, while the second measures gaseous pollutants levels in their operations at mining sites and compares it to available regulation documents, in aim to contribute to avoid potential occupational hazards there.

METHODOLOGY

The data used in this research is from two categories: the first one included values of operator workplace parameters measured outside of the cabin with specialized equipment on 10 open pit mine sites in Serbia and Montenegro on both types of mining machines, and the second category included operators answers to 6 survey questions regarding assessment of general importance of statements on health and safety and cleanliness of working environment. The list of questions is shown in the Table 1.

Table 1: List of survey questions.

Table available in the original PDF paper.

Question Label Q1 General importance of statement “Working environment conditions (temperature, humidity, dust...) are satisfactory (I feel comfortable while working)”

Q2

General importance of statement “The air quality in the working environment is satisfactory” Q3 General importance of statement “The cleanliness of the working environment is satisfactory”

General importance of statement “I know how to do my job in a safe manner” Q4 Q5 General importance of statement “I know how to maintain or improve health and safety in my workplace”

Q6

General importance of statement “I know how to reduce the risk of accidents and incidents in my workplace”

During data collection on 10 backhoe excavators (Figure 1a) and 6 loader excavators (Figure 1b) the measuring device Testo 340 is mounted on outside of the cabin, in order to measure the percentage of oxygen (O2) and carbon dioxide (CO2) and concentrations of nitrogen oxides (NOx), with individual measurement of nitrogen monoxide (NO). The results are later compared with regulatory documents and the relative exceedances were taken for the comparison.

Survey data was collected from the operators that actively worked on these types of machines in the same mining sites, and 45 operators of backhoe excavator and 22 operators of loader excavator willingly participated by giving answers on 6 questions using a Likert scale from 1 to 5 (with 1 meaning “not important”, and 5 meaning “very important”).

a) b) Figure 1: Backhoe excavator (a) and loader excavator (b). (Tasevski et al., 2025).

Collected data, both from the measuring instrument and from survey firstly is checked for normality and descriptive statistics are done. As none of variables behaved according to normal distribution, according to the results of skewness and kurtosis, a comparison between two types of machines for all parameters was performed using nonparametric Mann – Whitney U test, and the results of it are shown in the next part.

RESULTS

Measurements were conducted on the 10 backhoe excavators and 6 loader excavators in real work conditions at open pit mines in Serbia and Montenegro. In total, eighteen different parameters were measured and in the scope of this paper the data about gaseous pollutants were selected for further comparison between two groups of machines. Descriptive statistics about parameters of interest are given in Table 2.

Table 2: Descriptive statistics of measured values.

Table available in the original PDF paper.

Machine Avg. overrun Value of NOx [%]

Maximum % of Allowed Value Measured of NOx

Backhoe N 10 10 Min. 12.5 147.5

Max. 632.5 1765 Mean 356.07 984.1

Std. Dev. 205.36 576.21 CV% 57.67 58.55

Loader N 6 6 Min. 6.74 67.5

Max. 207.5 737.5 Mean 76.85 296.29

Std. Dev. 79.51 245.2 CV% 103.46 82.76

Since the CV values are above 30%, dataset shows high variability and do not follow the normal distribution. Due to this reason, hypothesis testing was conducted using nonparametric Mann – Whitney test and results of which are shown in Table 3.

Table 3: Results of nonparametric tests on workplace measurement.

Table available in the original PDF paper.

Mann-Whitney AVG % O2 0.002

AVG ppm NO 0.042 AVG % CO2 0.002

Avg. value of overrun of NOx [%] 0.040 Maximum % of allowed value measured of NOx 0.022

Along with the measurements, the machine operators were surveyed on questions from the field of safety and occupational health and safety. The structure of the respondents is shown in Tables 4, 5 and 6. In total, 45 backhoe excavator operators and 22 loader operators were surveyed.

Table 4: Age distribution of respondents.

Table available in the original PDF paper.

Machine Age % Backhoe 25 or less 4.40%

26–35 20.00%

36–45 44.40%

46–55 22.20%

56 or more 8.90% Loader 25 or less 13.60%

26–35 22.70%

36–45 13.60%

46–55 27.30%

56 or more 22.70%

Table 5: Distribution of qualifications of respondents.

Table available in the original PDF paper.

Machine Worker Qualification % Backhoe 5 or less 13.30%

10–15 37.80%

16–20 11.10%

21–25 13.30%

26–30 13.30%

31 or more 11.10% Loader 5 or less 27.30%

5–10 22.70%

21–25 4.50%

26–30 22.70%

31 or more 22.70%

Table 6: Frequency of injured operators/ respondents.

Table available in the original PDF paper.

%

Machine Had Injury on Work Backhoe Yes 22.20%

No 77.80% Loader Yes 9.10%

No 90.90%

Survey answers were firstly checked for normality and descriptive statistics divided by groups are shown in Table 7.

Table 7: Descriptive statistics of survey questions.

Table available in the original PDF paper.

Skewness Kurtosis

Machine N Min Max Mean Std. Dev.

Var Cv (%) Backhoe Q1 45 1 5 4.13 0.92 0.84 22.2 –1.19 1.84

Q2 44 1 5 4.11 1.15 1.31 27.9 –1.4 1.19 Q3 44 1 5 4.34 0.94 0.88 21.6 –1.81 3.53

Q4 44 2 5 4.73 0.62 0.39 13.2 –2.75 8.52 Q5 44 3 5 4.61 0.58 0.34 12.6 –1.22 0.59

Q6 44 3 5 4.75 0.49 0.24 10.3 –1.81 2.59 Loader Q1 20 2 5 4.55 0.83 0.68 18.2 –2.05 4.08

Q2 20 3 5 4.7 0.57 0.33 12.1 –1.84 2.86 Q3 20 3 5 4.7 0.57 0.33 12.1 –1.84 2.86

Q4 20 4 5 4.9 0.31 0.1 6.3 –2.89 7.04 Q5 20 4 5 4.9 0.31 0.1 6.3 –2.89 7.04

Q6 20 4 5 4.9 0.31 0.1 6.3 –2.89 7.04

Backhoe and Loader Excavator Operators’ Workplace 123 Both, skewness and kurtosis values for all dataset shows that data do not follow normal distribution, so the nonparametric Mann-Whitney U test was chosen for testing the differences between the backhoes and loaders and results are shown in Table 8.

Table 8: Results of nonparametric Mann-Whitney U test.

Table available in the original PDF paper.

Question Mann-Whitney U Q1 0.039 Q2 0.033

Q3 0.115 Q4 0.289 Q5 0.042

Q6 0.223

CONCLUSION

The first step in comparison of the examined mining machines was descriptive statistics on both data sets. Results show that both types of machines had serios exceedance of allowed values, with backhoe excavator maximum exceedances of more than 6.3 times over allowed, and loader maximum exceedances of 2 times over allowed. The difference can be seen also on the mean value of exceedance where backhoe averaged 3.5 times, and loader only 76%. From the view of data, one loader didn’t even exceed permissible values during the period of measuring.

Nonparametric testing between machines for measured parameters of work environment, showed significant differences in several elements. Results show that average percent of oxygen and carbon dioxide concentrations have the most significant difference between machines, but concentrations of nitrate oxides together with nitrate monoxide also showed very significant differences.

Survey was conducted on the same mining sites as measurement, and it included 45 operators of backhoe excavator and 22 loader excavator operators. Majority of backhoe operators were between 36 and 45 years old with near equal distribution in groups of 26 to 35 years old and 46 to 55 years old, while operators of loaders were more uniform across all intervals with the most operators between 46 and 55 years old. The work experience of operators showed a bit different results with backhoe operators spanning uniformly across all groups with most operators with 10 to 15 years of experience, but loader operators are clearly divided in 2 separate groups with up to 10 years of experience (48%) and more than 26 years of experience (45.4%). Information about percentage of operators that had injury on work shows that more backhoe operators had injury at work, 22.2% of them, then the loader operators of which only 9.1% had it.

All six questions asked in the survey had the purpose of evaluating the general importance of a certain aspect of health and safety at work from the operator’s perspective. Descriptive statistics showed a fairly good spread of operator’s answers, but based on skewness and kurtosis of the individual questions, none of them have a normal distribution. Based on that conclusion, nonparametric Mann – Whitney test was conducted in order to compare two types of machines, and the results shown that significant difference exists in understanding of the importance of questions about work environment conditions (temperature, humidity, dust…), air quality in the working environment and maintaining and improving health and safety at work. Answers on the other three questions didn’t show significant difference.

The result of testing could be correlated with higher average level of work experience, and higher percentage of operators that had work related injury during career.

For further research, apart from sample enlargement and inclement of operators from other types of mining machines, it could be very beneficial to include measurement of other parameters of working environment and conducting a correlation analysis between the responses of operators of a particular type of machine and the measured values on those same machines.

ACKNOWLEDGMENT

This research was supported by the Ministry of Science, Technological Development and Innovation of the Republic of Serbia under the Agreement on Financing Scientific Research Work of Teaching Staff at Accredited Higher Education Institutions in 2025 No. 451-03-137/2025-03/ 200105, from 04.02.2025, the bilateral cooperation between the Republic of Serbia and the Republic of Austria SAFECORNER No. 337-00-216/2023-05/244 and Eureka project No. 20495 - SMARTMEN.

REFERENCES

Altiti, A. H., Alrawashdeh, R. O., Alnawafleh, H. M., Altiti, A. H., Alrawashdeh, R. O., & Alnawafleh, H. M. (2021). Open Pit Mining. In Mining Techniques—Past, Present and Future. IntechOpen. https://doi.org/10.5772/intechopen.92208 Arango-Retamozo, S. M., Cotrina-Teatino, M. A., Marquina-Araujo, J. J., Portilla-

Rodríguez, H. R., Torres-Rivera, C. M., & Vega-Gonzalez, J. A. (2023). Estimating the Economic Impact of Mining Accidents: A Case Study from Peru. International Journal of Safety & Security Engineering, 13(3). Bettens, S. p., Siegrist, P. m., & McAree, P. r. (2022). How do operators and environment conditions influence the productivity of a large mining excavator? International Journal of Mining and Mineral Engineering, 13(1), 18–36. https:// doi.org/10.1504/IJMME.2022.124143 Brkić, A. D., Maneski, T., Ignjatović, D., Jovančić, P. D., & Spasojević Brkić, V. K.

(2014). Diagnostics of bucket wheel excavator discharge boom dynamic performance and its reconstruction. Eksploatacja i Niezawodność, 16(2), 188–197. Brkić, V. S., Perišić, M., & Janev, N. (2026). Excavator Operators’ Working Conditions and Its’ Failure Rates Prediction by Artificial Neural Network Modelling. In A. Emrouznejad, S. Hammoudi, & F. Wijnhoven (Eds.), Smart Business Technologies (Vol. 2589, pp. 1–16). Springer Nature Switzerland. https://doi.org/10.1007/978- 3-032-06075-4_1

Backhoe and Loader Excavator Operators’ Workplace 125 Čelebić, M., Bajić, D., Bajić, S., Banković, M., Torbica, D., Milošević, A., & Stevanović,

D. (2024). Development of an integrated model for open-pit-mine discontinuous haulage system optimization. Sustainability, 16(8), 3156. Czmochowski, J., & Pietrusiak, D. (2012). Selected problems in designing and constructing surface mining machinery. FME Transactions, 40, 153–164. Duarte, J., Marques, A. T., & Santos Baptista, J. (2021). Occupational accidents

related to heavy machinery: a systematic review. Safety, 7(1), 21. Edwards, D. J., Holt, G. D., & Harris, F. C. (2002). Predicting downtime costs of tracked hydraulic excavators operating in the UK opencast mining industry. Construction Management and Economics, 20(7), 581–591. https://doi. org/10.1080/01446190210163552 Jung, S., Kim, S., Lim, Y., Lee, J., Chung, T., Hong, H., Mun, S., Lee, S., Jang, W.,

& Lim, J. (2020). Emission Characteristics of Hazardous Air Pollutants from Construction Equipment. Aerosol and Air Quality Research, 20(9), 2012–2024. https://doi.org/10.4209/aaqr.2020.04.0131 Kassem, M., Mahamedi, E., Rogage, K., Duffy, K., & Huntingdon, J. (2021).

Measuring and benchmarking the productivity of excavators in infrastructure projects: A deep neural network approach. Automation in Construction, 124, 103532. https://doi.org/10.1016/j.autcon.2020.103532 Kekeç, B., Bilim, N., & Bilim, A. (2023). Occupational health and safety in excavation works. 3rd International Civil Engineering and Architecture Conference (CEAC 2023), 17–20. https://www.researchgate.net/profile/Niyazi- Bilim/publication/375723318_Occupational_health_and_safety_in_excavation_ works/links/65586d713fa26f66f40f8b46/Occupational-health-and-safety-in- excavation-works.pdf Khan, A. U., & Huang, L. (2023). Toward zero emission construction: a

comparative life cycle impact assessment of diesel, hybrid, and electric excavators. Energies, 16(16), 6025. Lee, J., Kim, B., Sun, D., Han, C., Ahn, Y., Lee, J., Kim, B., Sun, D., Han, C., & Ahn, Y. (2019). Development of Unmanned Excavator Vehicle System for Performing Dangerous Construction Work. Sensors, 19(22). https://doi.org/10.3390/ s19224853 McCann, M. (2006). Heavy equipment and truck-related deaths on excavation

work sites. Journal of Safety Research, 37(5), 511–517. https://doi.org/10.1016/j. jsr.2006.08.005 Mirzaei Aliabadi, M., Aghaei, H., Kalatpour, O., Soltanian, A. R., & Nikravesh, A. (2020). Analysis of human and organizational factors that influence mining accidents based on Bayesian network. International Journal of Occupational Safety and Ergonomics, 26(4), 670–677. https://doi.org/10.1080/10803548.201 8.1455411 Nowrouzi-Kia, B., Sharma, B., Dignard, C., Kerekes, Z., Dumond, J., Li, A., &

Larivière, M. (2017). Systematic review: Lost-time injuries in the US mining industry. Occupational medicine, 67(6), 442–447. Palega, M., & Rydz, D. (2018). Work Safety and Ergonomics at the Workplace an Excavator Operator. Trans Motauto World, 3(1), 25–29. Perišić, M., Spasojević Brkić, V., Mihajlović, I., Brkić, A., & Janev, N. (2024). Excavators’

Cabins Ergonomic Design Influential Factors Modelling: Preliminary Study. Human Factors and Systems Interaction, 154, 39–48. https://doi.org/10.54941/ ahfe1005351

Sanmiquel, L., Bascompta, M., Rossell, J. M., Anticoi, H. F., Guash, E., Sanmiquel, L., Bascompta, M., Rossell, J. M., Anticoi, H. F., & Guash, E. (2018). Analysis of Occupational Accidents in Underground and Surface Mining in Spain Using Data-Mining Techniques. International Journal of Environmental Research and Public Health, 15(3). https://doi.org/10.3390/ijerph15030462 Spasojević Brkić, V., Mihajlović, I., Perišić, M., & Janev, N. (2024). Comparing

the duration of different types of excavator downtime. Proceedings of 14th International Symposium Engineering Management and Competitiveness EMC 2024, 1(1), 79–83. Spasojević Brkić, V., Misita, M., Brkić, A., Veljković, Z., Perišić, M., Papić, N., & Janev, N. (2022a). Risk Management and Excavator Downtime Analysis. 12th International Symposium Engineering Management and Competitiveness 2022 (EMC 2022), 98–105. Spasojević Brkić, V., Petrović, N., & Bugarić, U. (2023). Reliability-based risk

assessment of auxiliary machinery in open-pit mines: case study of a hydraulic excavator. In XIII International Conference Industrial Engineering and Environmental Protection (IIZS 2023), 5-6th October 2023., Zrenjanin, Serbia, 2023. (Vol. 13, pp. 200–207). Technical Faculty “Mihajlo Pupin”, Zrenjanin, University of Novi Sad. Tasevski, D., Milev, S., Dimitrovski, Z., & Anastasov, S. (2025). Comparative analysis of the characteristics of Backhoe excavators and Loader excavators. International Refereed Journal of Engineering and Science, 14(3), 65–77. Ural, S., & Demirkol, S. (2008). Evaluation of occupational safety and health in

surface mines. Safety Science, 46(6), 1016–1024. https://doi.org/10.1016/j. ssci.2007.11.010 Waluś, K. J., Warguła, Ł., Krawiec, P., & Adamiec, J. M. (2018). Legal regulations of restrictions of air pollution made by non-road mobile machinery—The case study for Europe: A review. Environmental Science and Pollution Research, 25(4), 3243–3259. Wang, Y., Cai, H., Hu, X., Liu, P., Yan, Q., & Cheng, Y. (2024). Data-driven method

for estimating emission factors of multiple pollutants from excavators based on portable emission measurement system and online driving characteristic identification. Science of The Total Environment, 912, 169472. https://doi. org/10.1016/j.scitotenv.2023.169472

Cover of the proceedings volume Human Factors and Systems Interaction

Explore the complete digital volume

Human Factors and Systems Interaction

Read this individual research paper free through the original publisher, or explore the full digital proceedings book.

ISBN 979-8-950676-06-2

Explore this ISBN in the AHFE Bookstore Listed in the July 2026 bookstore catalogue; search by ISBN to confirm current availability · Digital book purchase optional

Explore Related Research

Related research 8 matches

More papers from this volume

← Back to Research ExplorerBrowse the full library →