Kumru Didem Atalay, Yusuf Tansel Ic (2023). Determination of preferences in auto glass selection process. In: Production Management and Process Control. AHFE Open Access, vol. 104, pp. 91–96. https://doi.org/10.54941/ahfe1003056
Glass is a solid material with an inorganic amorphous structure, prone to fracture, defined as transparent or translucent, and usually observed in a complicated form. In auto glasses, on the other hand, transparency, that is, light transmittance is directly proportional to the colour of the glass. In auto windows, the colour of the glass is of great importance because the driver's vision is crucial due to specific light transmission rules. However, the thickness of the auto glass characterized as durable also causes different preferences in terms of customer requests. In this study, we carried out to rank the customer preferences based on customer expectations using the sales data for three years in terms of the colour and thickness of auto glass. Within the scope of the study, we proposed a trapezoidal fuzzy number integrated fuzzy entropy and fuzzy TOPSIS model to rank the alternative auto glass. A case study is also presented for illustrative purposes.
Due to their excellent temperature resistance, high strength, abrasion resi- stance, and good photo stability, auto glasses are widely employed in the automotive industry. Typically, auto glasses are produced utilizing high- temperature equipment that causes high-temperature creep in the glass.
Chen et al. (2010) offer a nonlinear constitutive equation to describe the creep of glasses based on the experiments. The nonlinear uniaxial consti- tutive equation better represents the creep process of auto glasses at high temperatures when compared to theoretical prediction and experimental evi- dence. Due to their strong heat and mass transfer capabilities, impinging air jets are frequently used for heating, cooling, and drying applications. The purpose of their study is to research the car glass tempering project. Expe- rimental research presented on the heat transfer properties of heated glass plates during cooling with cooperatively positioned circular air jets (Gölcü et al., 2012). During the manufacturing process of tempered car glass, hea- ting, and abrupt cooling are two of the most crucial procedures impacting the tempering quality. Yazıcı et al., (2015) analysed cooling times and heat tran- sfer properties during the production of tempered glass rapid cooling process. Akcay et al. (2016) changed the cooling time and the number of broken glass particles in the tempered glass plates. This was done by conducting an auto
glass tempering process at various cooling unit configurations and cooling temperatures. The well-known glass maker and finisher Glas Trosch provi- des premium glass products for the whole building sector as well as the auto industry. The usage of an all-glass staircase demonstrates how Glas Trosch, a forward-thinking glass manufacturer, has embraced the trend toward massive facade components. The illustration clearly shows that provided the soluti- ons selected are adequate for dealing with glass as the principal material, big, complicated structural all-glass components can have surprisingly simple yet aesthetically pleasing features (Wälchli et al., 2012).
TRAPOZEDIAL FUZZY NUMBER AND DEFUZZIFICATION PROCESS Different fields, including linguistics, statistics, engineering, physics, biology, and experimental sciences, utilize fuzzy theory. The fuzzy sets theory was established by Zadeh (1965). The underlying theory and the theory of multi- ple criteria decision-making mesh well together. It improves it and broadens its application to include uncertain data. As a result, the option to employ fuzzy rather than crisp data expressed in terms of a single number becomes available. In this section, some basic definitions of fuzzy sets, fuzzy numbers, and the defuzzification process are given.
Definition 1: The membership function µeA (x) of a fuzzy set eA in the discourse universe X assigns a real integer in the range [0, 1] to each ele- ment x in the universe. The grade of membership of x in A is represented by the value of the function µeA (x) for A and x.
a1, a2, a3,a4
Equations and mathematical formulas are available in the original paper PDF.
and the membership function µeA (x) is given in Eq. (1) [Equation or mathematical symbol available in the original paper PDF][Equation or mathematical symbol available in the original paper PDF]
a2 < x < a3 a3 < x < a4
0, x < a1 x−a1 a2−a1 , a1 < x < a2 1, x−a1 a2−a1 ,
Equations and mathematical formulas are available in the original paper PDF.
x > a4
Definition 3: The process of generating a quantifiable outcome in fuzzy logic is called defuzzification. When fuzzy logic is used in industrial processes, defuzzification issues arise (Lavasani et al., 2015). The center of the area is one of the defuzzification techniques which was developed by Sugeno (1999), given in Eq. (2).
R a2
R a3
R a4
a1
a3
a2 xdx +
x−a1 a2−a1 xdx +
a4−x a4−a3 xdx R a2
R a3
R a4
a1
a3
a2 dx +
x−a1 a2−a1 dx +
and λ is a positive real number. Some main
b1, b2, b3, b4
Determination of Preferences in Auto Glass Selection Process 93
FUZZY ENTROPY AND FUZZY TOPSIS WITH TRAPOZEDIAL FUZZY NUMBER The uncertainty metric is used as the information measure. Consequently, the fuzziness measurements are often known as fuzzy information measures. Fuzzy entropy is a measurement of the amount of fuzzy information obtained from a fuzzy set or fuzzy system. It is important to emphasize how fuzzy entropy differs from traditional Shannon entropy in that no probabilistic idea is required to characterize it (Al-Sharhan, 2001).
One of the well-known traditional MCDM methods, the Technique for Order Performance by Similarity to Ideal Solution (TOPSIS), may serve as the foundation for creating alternative selection models that can successfully handle these qualities. Its foundation is the idea that the option of choice should be closest to the Positive Ideal Solution (PIS) and farthest from the Negative Ideal Solution (NIS).
Entropy With Trapezoidal Fuzzy Number
Determine the trapezoidal fuzzy decision matrix:
[Equation or mathematical symbol available in the original paper PDF]
[Equation or mathematical symbol available in the original paper PDF]
Equations and mathematical formulas are available in the original paper PDF.
where exij are trapezoidal fuzzy number for ith alternatives jth criteria, (i = 1, 2, . . . , m; j = 1, 2, . . . , n).
Construct the normalized fuzzy decision matrix Normalized trapezoidal fuzzy decision value is calculated by Eq. (9). The benefit and cost criteria in this step change the normalization process.
94 Atalay and ˙Iç
Obtain the entropy measure of each attribute Trapezoidal fuzzy entropy measure of each criteria denoted by Eq. (10)
Pn
− 1 ln(n)
Defuzzify fuzzy entropy measure of each criteria Defuzzification trapezoidal fuzzy entropy measure is calculated by using Eq. (2)
Calculate entropy weight for each criteria Entropy weight for each criterion is calculated by using Eq. (11)
eej TOPSIS With Trapezoidal Fuzzy Number
Construct the weighted normalized fuzzy decision matrix: Weighted normalized fuzzy decision matrix is eR = erij mn where erij = wj f ⊗pij.
Determine fuzzy positive (FPIS, A∗) and negative (FNIS, A−) ideal solutions: FNIS and FPIS can be defined as A∗ = 1, r∗ 2, . . . , r∗ n er∗
rij4
er−
rij1
and er−
j
n X
n X d
d− j
Calculate the closeness coefficient of each alternative The closeness coefficient of each alternative is calculated by Eq. (14)
i + d− i
The evaluation status of each provider and the ranking of all alternatives can be understood in accordance with the closeness coefficient in Eq. (14).
NUMERICAL RESULTS We apply the proposed methodology in this section. Firstly we determine the trapozedial fuzzy scale (Table 1). Then a trapezoidal fuzzy decision matrix is determine for the alternatives (Table 2).
Determination of Preferences in Auto Glass Selection Process 95
Trapezoidal fuzzy number Linguistic term (0.0,0.1,0.2) Very Low (VL) (0.1,0.2,0.2,0.3) Low (L) (0.2,0.3,0.4,0.5) Midly Low (ML) (0.4,0.5,0.5,0.6) Medium (M) (0.5,0.6,0.7,0.8) Midly High (MH) (0.7,0.8,0.8,0.9) High (H) (0.8,0.9,1.0,1.0) Very High (VH)
Table 2. Trapezoidal fuzzy decision matrix.
Table available in the original PDF paper.
Alternatives Sales (number) Quality Reliability I (26752,29789,32177,35356) VH H II (31464,37487,43267,47493) H ML III (7688,9932,12191,16343) H MH IV (575,804,1256,1987) M M V (1,7,113,329) ML M VI (5376,6622,7599,8578) MH M VII (359,707,907,2175) M ML VIII (88,195,450,816) ML ML IX (1,91,161,1332) L L X (2448,5417,6507,12666) M ML
Table 3. Closeness coefficient.
Table available in the original PDF paper.
i d−
i + d−
i CCi II 0.2317 0.3939 0.6256 0.6297 I 0.2790 0.3143 0.5933 0.5297 III 0.4449 0.1374 0.5823 0.2360 X 0.4848 0.1011 0.5860 0.1726 VI 0.4893 0.0831 0.5724 0.1451 IV 0.5368 0.0339 0.5707 0.0594 VII 0.5463 0.0247 0.5710 0.0433 VIII 0.5544 0.0150 0.5694 0.0263 V 0.5546 0.0139 0.5685 0.0244 IX 0.5583 0.0125 0.5708 0.0218
Then we calculate entrophy weights for all criteria. Entropy weight for each criterion is w1 = 0.8367, w2 = 0.0695, w3 = 0.0938. Finally, we tran- sferred these weights to the TOPSIS method to rank the alternatives. Accor- ding to the TOPSIS ranking results, Alternative II is the best choice for the case study. However, Alternative I is the competitive alternative with the second- best ranking score. Another alternative that is not suitable for the selection process is an auto glass (Table 3).
96 Atalay and ˙Iç
CONCLUSION
In this paper, we developed a trapezoidal fuzzy number integrated fuzzy entropy and fuzzy TOPSIS model to rank the auto glass alternatives. Our case problem has some linguistic criteria values. Also, our problem has sales values for the sales criteria. So, we developed a trapezoidal fuzzy number integrated fuzzy entropy and fuzzy TOPSIS model to rank the auto glass alternatives in this study. The fuzzy entropy method is used to determine data-based criteria weights to reflect the problem-based specification on the criteria weigh assi- gnment process which is the most critical stage for the TOPSIS model. As a result of these new ranking models, we easily diversification the ranking sco- res of the alternatives and provide useful results for the auto glass selection problem.
REFERENCES
Akcay, M., Yazici, H., Golcu, M., & Sekmen, Y. (2016). The effect of different cooling unit configurations and cooling temperatures on glass tempering quality. Atomization and Sprays, 26(10). Al-Sharhan, S., Karray, F., Gueaieb, W., & Basir, O. (2001, December). Fuzzy
entropy: a brief survey. In 10th IEEE international conference on fuzzy systems. (Cat. No. 01CH37297) (Vol. 3, pp. 1135–1139). IEEE. Aliabadi, M. M., Pourhasan, A., & Mohammadfam, I. (2020). Risk modelling of a hydrogen gasholder using Fuzzy Bayesian Network (FBN). International Journal of Hydrogen Energy, 45(1), 1177–1186. Chen, J. B., Xiao, K. Y., & Zhao, S. X. (2010). On the Creep Behavior of Auto
Glasses at High Temperatures. High Temperature Materials and Processes, 29(3), 133–142. Gölcü, M., Yazici, H., Akcay, M., Köseoglu, M. F., & Sekmen, Y. (2012). Experimental investigation of cooling with multiple air jets on auto glass tempering. Journal of the Faculty of Engineering and Architecture of Gazi University. Lavasani, S. M., Zendegani, A., & Celik, M. (2015). An extension to Fuzzy Fault Tree
Analysis (FFTA) application in petrochemical process industry. Process Safety and Environmental Protection, 93, 75–88. Sugeno, M., 1999. Fuzzy Modelling and Control, 1st ed. CRC Press, Florida, USA. Wälchli, E., & Kassnel-Henneberg, B. (2012). A True All-Glass Staircase. In Challenging Glass, IOS Press, 3 (pp. 151–156). Yazici, H., Akcay, M., Golcu, M., Koseoglu, M. F., & Sekmen, Y. (2015). Expe-
rimental investigation of transient temperature distribution and heat transfer by jet impingement in glass tempering processing. Iranian Journal of Science and Technology Transactions of Mechanical Engineering, 39(M2), 337–349. Zadeh, L. A. (1965). Fuzzy sets. Information and control, 8(3), 338–353.
LISTED IN THE AHFE DIGITAL BOOKSTORE CATALOGUE
Explore the complete digital volume
Production Management and Process Control
Read this individual research paper free through the original publisher, or explore the full digital proceedings book.
ISBN 978-1-958651-80-3
Explore this ISBN in the AHFE Bookstore ↗Listed in the July 2026 bookstore catalogue; search by ISBN to confirm current availability · Digital book purchase optional