Skip to article
AHFE AHFE Discoveries AHFE International Open Access Journal
AHFE OPEN ACCESS OPEN ACCESS CONFERENCE PROCEEDINGS PAPER

Designing 3D-Printed Smart-Sole Shoes for the Elderly: Examining Appearance Acceptance in Hong Kong

1 Department of Design, Faculty of Design and Environment, Technological and Higher Education Institute of Hong Kong, Hong Kong ↗
2 School of Fashion and Textiles, The Hong Kong Polytechnic University, Hong Kong ↗
3 Orthopaedics and Traumatology, The Chinese University of Hong Kong, Hong Kong ↗
4 Department of Sports and Recreation, Faculty of Management and Hospitality, Technological and Higher Education Institute of Hong Kong, Hong Kong ↗
Publication year
Digital Object Identifier10.54941/ahfe1004019

Abstract

The continuously evolving technology has driven researchers' investigation into integrating 3-Dimensional (3D) printing and smart functions into footwear. Comfortability has been identified as a crucial factor in creating shoe soles. Thus, numerous studies have been conducted to focus on the development of comfortable and functional footwear. Recent research has indicated that a prototype should be adapted in designing footwear to meet the expectations of older people, taking into consideration factors such as aesthetics and comfort. Of particular concern, the appearance of footwear is the top consideration for older women. Notably, their preferences revolve around the combination of shoe colours, fabric materials, patterns, shapes, heel height, and functional design features.This research aims to investigate the footwear appearance preferences of elderly individuals in Hong Kong, laying the foundation for designing and developing comfortable 3D-printed midsole smart sole shoes. A total of 50 healthy male and female subjects aged 50 and over will be recruited to complete a shoe aesthetics survey. The survey, consisting of 50 questions, will delve into the participants' subjective evaluations of shoe design aesthetics and the willingness to adopt the prototype. It will be divided into five parts, which will analyze the design of shoe faces, including colour, materials, fastening mechanism, heel height, and shoe styles for the elderly in the fashion market.The research will reveal the footwear appearance preferences of elderly individuals in Hong Kong, highlighting their design requirements. The survey results will aid in designing and developing comfortable 3D-printed midsole smart sole shoes for older people. Through the participants' expressions of design requirements on shoe aesthetics, further development in footwear design will be required to meet the needs of elderly individuals in terms of aesthetics and comfort. This study emphasizes the critical consideration of shoe aesthetics as a significant parameter in footwear design for older people.This research seeks to investigate the footwear appearance preferences of elderly individuals in Hong Kong to develop comfortable 3D-printed midsole smart sole shoes. By analyzing the participants' design requirements on shoe aesthetics, the findings will aid footwear manufacturers in developing shoes that meet the design preferences of elderly individuals, thereby improving their comfort and style. This study highlights the significance of considering shoe aesthetics as a crucial parameter in footwear design for the elderly population. Ultimately, the successful development of comfortable and stylish shoes can promote increased mobility and enhance the quality of life for this demographic group.

INTRODUCTION

Integrating 3-Dimensional (3D) printing and smart functions into footwear is a lead to step up the development of comfortable and functional footwear. Opening new opportunities for technology integration, such solutions should be adapted to designing footwear to meet the expectations of older people. In fact, comfortability has been identified as a crucial factor in creating shoe soles. In addition to the comfort of use, the appearance of footwear is a top consideration for older women. Their preferences revolve around the com- bination of shoe colours, fabric materials, patterns, shapes, heel height, and functional design features.

Functional footwear used to minimize risk of injury could be obtained from the comparison of ground reaction force in walking or running among different sole material components. The lower the ground reaction force, the more effective it is in minimizing the risk of injury. Indeed, technology is featured as an add-on function to provide more protective impact to human

© 2023. Published by AHFE Open Access. All rights reserved. 150

Designing 3D-Printed Smart-Sole Shoes for the Elderly 151

foot health. The use of higher quality materials and construction could offer major support to footwear. Further investigation reveals that older women considered practical intervention not only for comfort but also for aesthetics. The appearance of footwear was the most commonly reported concern in the findings. The research stated that the prototype was designed primarily with function and should give attention to aesthetics. (Menz et al., 2017) By adjusting materials, structures, and shapes of the midsoles, the 3D- printed midsoles could adjust the hardness and thickness by 3D-printing technologies to increase comfortability in terms of cushioning properties. Additionally, the aesthetics perspective should be investigated in the design and developed by a customization approach. To advance the application of smart insoles, the research further analyzed and investigated 3D-printed mid- soles with innovative pressure sensors. It was regarded to be innovative, versatile, and will provide comfort to older people (Baena Graciá, V., & Winkelhues, K.., 2016).

Investigating the footwear appearance preferences of elderly individ- uals in Hong Kong lays the foundation for designing and developing comfortable 3D-printed midsole smart sole shoes. The research therefore aimed to reveal the footwear appearance preferences of elderly individu- als in Hong Kong, highlighting their design requirements. The participants’ expressions of design requirements on shoe aesthetics indicate the need for further development in footwear design to meet the needs of elderly individ- uals in terms of both aesthetics and comfort. The successful development of comfortable and stylish shoes is implying the increase in mobility and the enhancement in the quality of life for this demographic group.

The current 3D-printing materials and construction development can eliminate the production progress and build up the comfortability through different printing structures and materials. The sustained direction of 3D- printed midsole technology in comfort and functional footwear for the older people’s market saves time and reduces materials in the manufacturing pro- cess, while meeting market demands and promoting environmentally-friendly products in the future.

METHODOLOGY

A quantitative method, distributing questionnaires, is used in this research. A set of 50 questions is set to create a five parts questionnaire in six pages.

A sample of 51 Hong Kong elderly volunteered to complete the question- naires and a convenience sampling method was used to collect the data. The collected data were analyzed by the statistical software, IBM SPSS. By using IBM SPSS Statistics, there were two quantitative analysis methods, cluster analysis and t-test analysis.

51 Hong Kong elderly (females and males aged between 50 and 80) who are volunteers invited. The subjects include 36 females and 15 males. The subjects may have different education levels, occupations and income as all samples are collected from social communities.

Average Elderly Shoe Size in Hong Kong Cluster analysis (Table 1 & 2) divides the data into groups (clustering). ‘Size 37’ and ‘Size 42’, are divided. In the cluster analysis, there were 36 samples which fell into the first cluster, ‘Size 37’, and 15 samples which fell into the second cluster, ‘Size 42’.

On average, the shoe sizes are size 37 and size 42 among the subjects, females and males respectively.

Table 1&2. Mean of Elderly Shoe Size for Males and Females.

Cluster

Number of cases in each Cluster

1 2 Size 42 37

Cluster 1 15.000 2 36.000 Valid 51.000 Missing .000

The Most Important Consideration: Comfort Five fundamental considerations, function, form, material, comfort and colour, are developed for footwear design.

Obviously, almost all of the subjects chose ‘Comfort’, which is 80% of subjects, as the most important consideration for footwear design. ‘Comfort’ is significantly considered for foot care, especially in an aging population.

1-Year Durability for Footwear Performance A pair of shoes with higher durability is one of the key criteria for better footwear performance. Elderly wear everyday shoes on a regular basis. To maintain good foot health, replacing everyday shoes regularly, every 6 to 12 months, is usual foot protection.

According to the shopping habits of the elderly in Hong Kong, most of the subjects, which is 70.6% of them, purchase a pair of new everyday shoes every 12 months or more. Indeed, in 1-year intervals, shoes are worn out quickly.

Proper Footwear Fitting for Daily Routine A majority of subjects have a hobby of strolling which is 35.29%. Most sub- jects have a hiking hobby, that is 27.45%. Coincidentally, most subjects have a traveling hobby of 27.45%. Their hobbies mostly require walking such that the exercise intensity is low.

Comparatively, the plantar pressure force is lower, resulting in lower foot pressure. Hobbies such as running and playing ball games require higher exer- cise intensity, which implies greater foot movements and higher foot pressure. The data showed that just 5.26%, subjects chose hobbies, most likely sports activities, which bring greater pressure to the foot.

As a result, in Hong Kong, the elderly prefer to do some light exercise and participate in casual activities, which see the foot care for better foot

Designing 3D-Printed Smart-Sole Shoes for the Elderly 153

health. The importance of getting proper fitting footwear is crucial for elderly person’s daily routine.

Popular Colour: Darker Shades According to the conceptual metaphor theory, different colours may con- cretize different meanings of abstract concepts, for example, dark blue gives people calm and relaxation.

In this survey (Figure 1), the group of colours ‘Black, Grey, White’ was rated in the highest mean mark, which is 4.14 out of 5 marks (Table 3). Followed by ‘Brown’, ‘Blue’ and ‘Indigo’, the mean marks were 3.57, 3.22 and 3.16 respectively. For further support with colour associations, elderly favored darker colours for shoes evoking internal sensations in fashion.

Figure 1: ‘Black, Grey, White’ colour group.

Figure available in the original PDF paper.

Table 3. Rate high in darker shades of colour.

Table available in the original PDF paper.

Descriptive Statistics N Range Minimum Maximum Mean Std. Deviation Red 51 4 1 5 2.08 1.339 Pink 51 4 1 5 2.25 1.495 Purple 51 4 1 5 2.49 1.405 Indigo 51 4 1 5 3.16 1.347 Blue 51 4 1 5 3.22 1.419 Cyan 51 4 1 5 2.59 1.417 Green 51 4 1 5 2.22 1.433 Yellow 51 4 1 5 2.10 1.221 Orange 51 4 1 5 2.47 1.347 Brown 51 4 1 5 3.57 1.269 Black, Grey, White 51 3 2 5 4.14 1.059

Valid N (listwise) 51

Popular Colour: Reddish Colour for Female T-test Analysis is applied to analyze the 2 groups of means at this stage (Figure 2). 2 groups of subjects, Female and Male, are divided.

To find the p-value for the test, the p-value of ‘Pink’ is .001, implying that (Table 4) the difference in means is statistically significant. In the survey, more females chose ‘Pink’ colour for shoes.

At the same time, the p-value of ‘Purple’ is .000, showing that the result is statistically significant in which ‘Purple’ is said to be more attractive for female subjects in this survey. These data indicated that reddish colour expressed much more attractive in footwear design for females.

Figure 2: ‘Pink’ & ‘Purple’ colour group.
Original PDF Figure 2:
Table 4. Rate high in reddish colour for female.

Table available in the original PDF paper.

Sig. (2-tailed) Mean Difference

Std. Error Difference Pink Equal variances assumed .007 1.211 .431 Equal variances not assumed .001 1.211 .350 Purple Equal variances assumed .000 1.639 .368 Equal variances not assumed .000 1.639 .291

Popular Materials: Flyknit Material selection is one of the important stages in the footwear design such that the material determines the aesthetic of shoes and the comfort of use. ‘Flyknit’ is a material made up of strong yet lightweight strands of yarn.

In this survey, subjects rated the highest marks for ‘Flyknit’ material in both aspects, i.e., Aesthetic which scored 3.98 mean marks and Comfort which scored 4.29 mean marks. On the other hand, ‘Mesh’ scored second highest marks in Comfort aspect which is 4.27 mean marks.

Popular Materials: Breathable in Stretch Apparently, both of the two materials ‘Flyknit’ and ‘Mesh’ are carrying out the same characteristics, which are soft in texture, lightweight, high per- meability and good stretchability, for comfort. In fact, ‘Flyknit’ consists of another remarkable characteristic that is the one-piece woven upper for aesthetic design of the footwear in the market.

CONCLUSION

In conclusion, a pair of shoes that offers both comfort of use and aesthetic design was welcomed by Hong Kong elderly in the market. Overall, the most important consideration of choosing footwear is ‘Comfort’ in Hong Kong’s aging population.

The majority of the Hong Kong elderly have habits of engaging in low- intensity exercise with less likelihood of injuries. This survey showed that most of the subjects have the hobbies of strolling, hiking and traveling. As a general rule, the foot plantar pressure acting between the foot and the sup- port surface is lower during low-impact workout. In Hong Kong, the elderly

Designing 3D-Printed Smart-Sole Shoes for the Elderly 155

would rather have light exercise and casual activities as part of their every- day locomotor activities. Thus, proper fitting of shoes for the foot care is a primary focus to maintain better foot health in the elderly person’s daily rou- tine. Footwear designed with support, strengthening and flexibility is highly recommended to keep healthy feet.

Footwear appearance acceptance in Hong Kong’s aging population demands darker colored stretchy material with high breathability. Darker colors, such as black and brown, are commonly associated with formality, giving a conventional impression. These neutral colors work well with dif- ferent statement colors, allowing for stylish mix-and-match possibilities. To a great extent, darker colored footwear is a classic option for the elderly to effortlessly dress up their daily shoe choices.

In addition to the female collection, elderly preferred reddish colours for footwear design. This sex difference in color preference due to the evolution of color vision (Hurlbert and Ling, 2007), reddish colour evolved as a natural preference among females. Ideally, two distinct tones of colours could be developed to accommodate for sex difference, in two footwear collections of male and female.

The flyknit upper offers higher flexibility for foot movements by virtue of its high-strength fibers. This lightweight design in footwear production uti- lizes flyknit technology to provide support and breathability in each pair of shoes. Among all the elderly subjects surveyed, the ’Flyknit’ fabric received the highest ratings in both the aspects of ’Aesthetic’ and ’Comfort’. This implies that the flyknit material is not only functional but also aesthetically pleasing, owing to the implementation of CNC knitting machines. Flyknit fabric could be the first choice of body material for producing footwear in the fashion market.

In the future research, the development of walking gait memory could be explored to provide additional cushioning or heel support that aligns with the low-intensity exercise habits of the aging population. This would promote natural foot movement and protect their feet for better health. Footwear intervention has the capacity to enhance balance, alleviate foot pain and improve gait tasks. Potential roles for gait memory in cushion could be intro- duced for elderly 3D-printing footwear, yet reducing the risk of falls in elderly by improving the posture, coordination and balance.

The development of 3D-printing materials has been rapidly evolving in this decade. The current development of 3D-printing materials and con- struction enable the enhancement of comfort through a wide range of materials available for 3D-printing. To adapt to the sustained direction of 3D-printed midsole technology, different materials are constantly working on developing new structures with improved properties and compatibility with different 3D-printing techniques. Additionally, in order to improve comfort and aesthetics in functional footwear for the older people’s mar- ket, the application of 3D-printing technology in footwear could probably make a breakthrough, for example, 3D-printing flyknit material applying to a functional upper, to reduce materials used in the manufacturing pro- cess, while expanding customization possibilities to meet market demands and promoting environmentally-friendly products in the fashion industry.

REFERENCES

Baena Graciá, V., & Winkelhues, K. (2016). The next revolution in mass customization: An insight into the sneaker market. Canetta, L., Pedrazzoli, P., Sorlini, M., Bettoni, A., Boer, C., Corti, D.: Customiza-

tion and Manufacturing Sustainability: general considerations and footwear investigation (2011) Cheng, S.-H., & Lee, C.-J. (2021). Gender differences in footwear visual perception. International Journal of Affective Engineering, 20(4), 257–264. https://doi.org/10.5057/ijae.ijae-d-20-00034 Gillath, O., Bahns, A. J., Ge, F., & Crandall, C. S. (2012). Shoes as a source of first impressions. Journal of Research in Personality, 46(4), 423–430. https://doi.org/10.1016/j.jrp.2012.04.003 Goonetilleke, R. S.: Footwear cushioning: relating objective and subjective measurements. Hum. Factors 41(2), 241–256 (1999). Goonetilleke, R. S.: The Science of Footwear. CRC Press, Boca Raton (2017). Jacques, J. J., Guimarães, L.: A study of material composition disclosure practices in

green footwear products. Work 41(Suppl. 1), 2101–2108 (2012). Janson, D., Newman, S. T., & Dhokia, V. (2019). Next Genera- tion Safety Footwear. Procedia Manufacturing, 38, 1668–1677. https://doi.org/10.1016/j.promfg.2020.01.117 Kaziur, P., Mikołajczyk, Z., Kłonowska, M., & Wo´zniak, B. (2022). Design methodology and technology of Textile Footwear. Materials, 15(16), 5720. https://doi.org/10.3390/ma15165720 Kwan, M. Y., Yick, K. L., & Wang, Y. Y. (2019). Impact of co-creation footwear

workshops on older women in elderly centers in Hong Kong. Asia Pacific Journal of Health Management, 14(1), 25–30. Ling, Y. and Hurlbert A. (2007). “A new model for color preference: universality and individuality,” in Proceeding of the 15th Color Imaging Conference (Albuquerque, NM: Society for Imaging Science and Technology;), 8–11. Matthias, E. C., Banwell, H. A., & Arnold, J. B. (2021). Methods for assessing

footwear comfort: a systematic review. Footwear Science, 13(3), 255–274. Menz, H. B., Auhl, M. and Munteanu, S. E. (2017). Preliminary evaluation of prototype footwear and insoles to optimise balance and gait in older people. BMC Geriatrics, 17(1). https://doi.org/10.1186/s12877-017-0613-2 Morio, C., Lake, M. J., Gueguen, N., Rao, G., Baly, L.: The influence of footwear on

foot motion during walking and running. J. Biomech. 42(13), 2081–2088 (2009). Ramsey, C. A., Lamb, P., & Ribeiro, D. C. (2022). Factors influencing runner’s choices of Footwear. Frontiers in Sports and Active Living, 4. https://doi.org/10.3389/fspor.2022.829514 Wilkinson, M., Stoneham, R., Saxby, L.: Feet and footwear: applying biological design and mismatch theory to running injuries. Int. J. Sports Exerc. Med. 4, 090 (2018). https://doi.org/10.23937/2469-5718/1510090

Cover of the proceedings volume Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence & Future Applications

Explore the complete digital volume

Human Interaction & Emerging Technologies (IHIET 2023): Artificial Intelligence & Future Applications

Read this individual research paper free through the original publisher, or explore the full digital proceedings book.

ISBN 978-1-958651-87-2

Explore this ISBN in the AHFE Bookstore Listed in the July 2026 bookstore catalogue; search by ISBN to confirm current availability · Digital book purchase optional

Explore Related Research

Related research 8 matches

More papers from this volume

← Back to Research ExplorerBrowse the full library →