Skip to article
AHFE AHFE Discoveries AHFE International Open Access Journal
AHFE OPEN ACCESS OPEN ACCESS CONFERENCE PROCEEDINGS PAPER

Wi-Fi Signal Analysis via Smartphones for Estimating Passenger Counts

Department of Computer Science, College of Computer Engineering and Sciences, Prince Sattam Bin Abdulaziz University, Al-Kharj, Saudi Arabia ↗
Publication year
Digital Object Identifier10.54941/ahfe1005901

Abstract

Smartphones have become integral to daily life, offering innovative applications across various domains. This study introduces a novel method for counting passengers by analyzing Wi-Fi signals emitted by their mobile devices. The research evaluates the effectiveness of leveraging Wi-Fi data to estimate occupancy, addressing a critical issue in public transportation management. The proposed system involves three core processes: signal detection, data filtering, and passenger count estimation. Key results indicate high accuracy in moderately crowded scenarios, with average deviations of 20% from actual counts and accuracy rates between 90% and 100%. However, under high-density conditions, the system tends to overestimate, occasionally doubling the real count. While further research is required to improve precision in such settings, this study lays a foundation for leveraging digital technologies to enhance transportation operations and service delivery.

INTRODUCTION

Public transportation systems are vital to the functioning of modern cities, serving as a primary mode of travel for millions daily. Consequently, local governments and transportation authorities have allocated substantial resources to enhance their quality and efficiency (Ryu et al., 2020). Simultaneously, the widespread adoption of smartphones, driven by rapid technological progress, has created a highly interconnected digital environment. Once rare among individuals aged 65 and older, smartphones are now widely used across all age groups, including seniors (PewResearchCenter, 2014). These devices have transformed into compact computers with diverse capabilities, such as GPS, compasses, and light sensors. As a result, there is growing interest in leveraging smartphones as research instruments to collect data on individuals’ behaviors and activities in various contexts (Farulla et al., 2015; Nicolau et al., 2015; Park et al., 2015; Bergé et al., 2015; Hu et al., 2015). Moreover, the extensive use of digital technologies has fundamentally changed how people interact with their environment. Homes, workplaces, and even vehicles have become “smart,” reflecting an increasing dependence on digital tools in everyday life. This evolution has spurred intense competition among corporations,

© 2025. Published by AHFE Open Access. All rights reserved. 103

104 Alatiyyah

governments, and organizations to adopt cutting-edge technologies and sustain their competitive advantage.

The emergence of open digital environments (ODEs) has recently created promising research opportunities, particularly in the context of public transportation systems such as metros, buses, trams, and stations (Bánhalmi et al., 2021; Hidayat et al., 2020; Wang & Zhang, 2020; Nitti et al., 2015). Despite the widespread availability of real-time schedules and updates for these modes of transport, overcrowding remains a persistent challenge (Wang & Zhang, 2020). The high costs associated with traditional passenger- counting systems on public transportation vehicles have spurred interest in alternative approaches, such as analyzing the digital Wi-Fi environment within these spaces. Specifically, the expenses related to installing and maintaining sensors on metros, buses, or trams are considerable. Thus, a proposed solution involves using more cost-effective technologies to capture and analyze signals emitted by passengers’ devices (Nitti et al., 2015).

This study focuses on ODEs, encompassing public spaces such as metro cars, buses, tram stations, shopping centers, and other bustling environments where unexpected data is plentiful. The primary aim is to evaluate whether analyzing the Wi-Fi environment can provide a reasonably accurate estimation of passenger density while minimizing costs. By examining signals emitted by passengers’ devices, the study seeks to address key questions about passenger behavior in public transportation contexts, including the extent of Wi-Fi usage, the frequency of smartphone use during transit, and methods to distinguish signals originating from inside versus outside the vehicle. Ultimately, this research seeks to deepen our understanding of the complex interactions within digital environments and their significant influence on everyday life.

Building on the preceding discussion, this study introduces an innovative method for analyzing Wi-Fi signals emitted by smartphones within public transportation environments, such as metro cars, buses, tram cars, and stations, utilizing Wireshark—an advanced network analysis tool. The study explores the use of media access control (MAC) addresses as unique identifiers and the capture of signals from passengers’ devices via probe requests. The key contributions of this paper are proposing a cost- effective and scalable approach to estimating passenger counts by leveraging smartphone Wi-Fi signals, developing a signal acquisition and filtering pipeline to enhance accuracy by removing noise and non-mobile device signals, and designing an algorithm that uses received signal strength indication (RSSI) values while accounting for the structural and spatial characteristics of public transport vehicles and stations.

The structure of the paper is as follows. Section 2 provides a comprehensive review of relevant literature. Section 3 details the proposed methodology, Section 4 presents the experimental findings, Section 5 discusses the results, and the conclusions are presented in Section 6.

RELATED WORK

Researchers have explored various methods to address limitations in video surveillance due to privacy concerns and high costs. For example, Zeng

Wi-Fi Signal Analysis via Smartphones for Estimating Passenger Counts 105

et al. (2015) used Wi-Fi Channel State Information (CSI) to analyze shopper behavior, achieving high accuracy, while Maekawa et al. (2014) developed a Bluetooth-based system to detect train congestion with 83% accuracy. Scholz et al. (2015) introduced a Wi-Fi-based fingerprinting system for classifying individuals by height categories, achieving up to 76% accuracy. Other studies, such as Wei et al. (2015) and de Sanctis et al. (2015), explored the use of radio frequency interference and Wi-Fi beacon analysis for human activity recognition, demonstrating innovative methods with varied accuracy levels.

In indoor localization, GPS limitations have led researchers to explore alternative techniques. Lymberopoulos et al. (2015) tested 22 systems and achieved a minimum error of 0.72 m using a 2.4 GHz Phase Offset technique. Chen et al. (2015) proposed BearLoc, a framework integrating sensors and algorithms to simplify development and improve localization accuracy. Sen et al. (2015) developed CUPID2.0, a system achieving 1.8 m accuracy through infrastructure-free implementation, while Meng et al. (2015) introduced semantic translation of Wi-Fi coordinates for identifying store names with over 90% accuracy. Despite efforts like Kocakusak et al.’s (2015) RSSI-based model database, results indicate considerable variability in accuracy across methods, highlighting the need for further refinement in indoor positioning.

Crowd detection methods have also advanced, with researchers moving beyond traditional sensors. Lathia et al. (2014) used smartphones and social media to provide real-time passenger updates, while Zhou et al. (2015) leveraged cellular signals to estimate urban traffic density in Singapore, demonstrating the feasibility of these approaches despite environmental challenges.

Wi-Fi probe requests have emerged as a versatile tool in various applications. Freudiger (2015) analyzed probing frequency in smartphones, while Schaub et al. (2014) developed PriCal, a system using MAC addresses for efficient time management in offices. Studies by Barbera et al. (2013) and Fukuzaki et al. (2014) analyzed large-scale probe data for sociological insights and pedestrian flow trends, respectively. Other works, such as a Wi-Fi-based self-quarantine monitoring system (Guo and Ho, 2022) and multi-story localization using RSSI signals (Magsino et al., 2021), further demonstrate the potential of probe requests for diverse research and practical applications. These studies underscore the promise of Wi-Fi signal analysis for behavioral insights, tracking, and mobility analysis.

METHODOLOGY

This study proposes a system to detect crowding in public transportation by analyzing Wi-Fi signals emitted by passengers’ devices. The methodology is tested through an experimental study conducted on Brighton & Hove buses, employing qualitative research techniques to assess its effectiveness. The system comprises three components: signal capture, data filtering, and analysis and estimation, each with specific tasks to ensure accurate data processing.

106 Alatiyyah

In the signal capture phase, the system uses Tshark, a streamlined version of Wireshark, to collect Wi-Fi packets from passengers’ devices onboard the bus. Key data elements include MAC addresses, device names, SSIDs, and RSSI values, which help identify devices and filter out external or irrelevant signals. Signals are captured live during bus journeys, offering a cost-effective data collection approach compared to methods near bus stops. Filters are applied to eliminate extraneous data such as IP addresses and protocol types, ensuring only relevant information is retained.

The data filtering phase applies several steps to refine the collected data. Devices located outside the bus are excluded based on RSSI values, with only signals stronger than –80 dBm considered valid. Non- mobile devices are also removed, leaving a dataset of signals likely originating from passengers’ smartphones. Duplicate MAC addresses are eliminated to ensure the dataset reflects unique devices present on the bus.

In the analysis and estimation phase, an algorithm calculates the frequency of each MAC address appearing in the filtered data. Devices captured in more than 20% of the packets are identified as likely belonging to passengers, and their count serves as an estimate of the number of individuals onboard. The system operates in intervals between bus stops, capturing and processing data iteratively. Experiments reveal that using a 20% threshold provides the most accurate passenger estimates.

This methodology leverages real-time Wi-Fi signal data to provide a scalable, efficient approach to estimating passenger numbers in public transportation, reducing costs and improving accuracy compared to traditional methods.

EXPERIMENTAL RESULTS The proposed system relies on specific initial values, such as the frequency of signal transmissions from smartphones and signal strength within and outside a bus environment, to ensure functionality and avoid incorrect assumptions. Initial experiments, conducted using a laptop as the capture device in a controlled setting, aimed to detect smartphones on buses, measure WLAN packet transmission frequency, and gather foundational data for system design. Two main experiments were conducted to evaluate the system’s performance in passenger counting, with manual counts taken for comparison. These experiments recorded approximately 127,000 unique MAC addresses, reflecting the abundance of digital devices detected. While the system’s estimates were often higher than the actual number of passengers, achieving accuracy rates of 90% to 100% in less crowded areas highlighted its potential. The results provide valuable insights into the system’s functionality, with detailed findings presented to inform further refinement.

Wi-Fi Signal Analysis via Smartphones for Estimating Passenger Counts 107

Table 1. Number of MAC address in each bus stop at Experiment 01.

Table available in the original PDF paper.

Bus Stop Name All Data RSSI Filter Non-Mobile Filter Amex Stadium 913 106 59 Brighton University Falmer 734 216 150 Amex Stadium 913 106 4 Falmer Station 116 21 13 Brighton Academy 83 25 10 Coldean Lane 618 196 159 Wild Park 2972 1155 1040 Ringmer Road 39 25 12 Moulsecoomb Way 50 19 10 Bates Estate 125 55 27 Brighton University 181 58 24 Mithras House 125 84 39 Coombe Road 360 79 39 Lewes Road Bus Garage 286 97 60 Melbourne Street 673 268 213 St Pauls Street 1025 719 633 Elm Grove 1585 732 649 Bottom of Elm Grove 499 324 288 De Montfort Road 876 309 261 Bonchurch Road 51 343 296 Queens Park Junction 361 184 138 Baxter Street 124 68 35 The Hanover 131 81 49 Pepper Pot 564 186 148 Albion Hill 258 125 62 Egremont Gate 534 302 232 Park Street 1704 992 858 Gala Bingo Hall 120 49 20 College Place 1000 178 156 County Hospital 155 18 7 Chesham Street 1029 269 184 St Marys Ilall 257 155 135 LiDL Superstore 861 522 486 Roedean Road 1116 600 549 Marina Cinema 421 96 55

In the first experiment, data collection took place on Bus 23 between Amex Stadium and Marina Cinema from 18:38:55 to 19:24:12, capturing over 20,000 unique MAC addresses with varying counts across bus stops. For instance, Wild Park recorded approximately 3,000 unique MAC addresses, although this does not necessarily correspond to the number of passengers, as some signals originated from outside the bus. Table 1 outlines the unique MAC addresses per stop, while Table 2 reveals that 60 MAC addresses were detected three or more times. After applying an RSSI filter to exclude signals from outside the bus, the number of MAC addresses dropped to 8,000, representing a 58% reduction per stop. Further refinement to remove non-mobile devices led to an additional 33% average decrease in MAC

108 Alatiyyah

addresses per stop, leaving only 41 MAC addresses captured more than twice. Table 3 compares manually recorded passenger counts with system estimates, highlighting high accuracy in some locations and discrepancies in others, which will be addressed in the next section.

Table 2. Number of MAC address in each bus stop at Experiment 01.

Table available in the original PDF paper.

Bus Stops All MAC Address RSSI Filter Non-Mobile Filter 35 bus stops (maximum number) 1 1 None 20 to 25 2 2 1 10 to 19 5 5 4 4 to 9 16 16 16 3 33 17 5 2 1204 240 47 Only in a bus stop 19000 7900 6800

Table 3. Results comparison for the number of passengers obtained by the developed system and manual recording in Experiment 01.

Table available in the original PDF paper.

Bus Stop Name Manual System Bus Stop Name Manual System Amex Stadium 4 5 De Montfort Road 19 265 Brighton University 5 7 Bonchurch Road 17 298 Amex Stadium 5 4 Queens Park 17 9 Falmer Station 9 6 Raxter Street 16 38 Brighton Academy 9 11 The Hanover 16 51 Coldean Lane 14 5 Pepper Pot 18 150 Wild Park 14 17 Albion Hill 18 5 Ringmer Road 15 13 Egremont Gate 18 234 Moulsecoomb Way 15 11 Park Street 18 9 Bates Estate 15 103 Gala Bingo Hall 21 21 Brighton University 15 24 College Place 23 157 Mithras House 15 53 County Hospital 21 7 Coombe Road 16 41 Chesham Street 19 6 Lewes Road Bus Garage 16 60 St Marys Hall 20 137 Melbourne Street 15 6 LiDL Superstore 18 2 St Pauls Street 19 635 Roedean Road 25 8 Elm Grove 16 650 Marina Cinema 1 1 Bottom of Elm Grove 18 293

The second experiment was conducted on the Route 7, running from Brighton Marina to Livingstone Road between 09:20:24 and 09:58:52, during which the system captured over 24,000 unique MAC addresses. Table 4 presents the number of MAC addresses recorded at each bus stop, revealing that most were detected at only one stop, while approximately 5% were captured at multiple stops. Table 5 details the MAC addresses captured at multiple bus stops. Applying an RSSI filter reduced the number of MAC addresses by about 80%, with the filtered results shown in Table 4. A subsequent non-mobile filter further decreased the number of MAC addresses

Wi-Fi Signal Analysis via Smartphones for Estimating Passenger Counts 109

by an average of 35% per stop. Finally, Table 6 compares the manually recorded passenger numbers to the system’s estimated results, highlighting the system’s performance in passenger detection.

Table 4. Number of MAC address in each bus stop at Experiment 02.

Table available in the original PDF paper.

Bus Stop Name All Data RSSI Filter Non-Mobile Filter Brighton Marina 358 47 27 Arundel Road 319 82 57 LiDL Superstore 126 43 19 Sussex Square 264 24 11 St Marys Hall 214 29 16 Chesham Street 130 31 18 County Hospital 4964 342 206 College Place 237 39 27 Gala Bingo Hall 982 133 99 Park Street 275 87 44 Devonshire Place 367 99 58 Law Courts 580 144 108 Old Steine 1002 232 190 Old Steine2 879 201 113 North Street 2812 595 449 Clock Tower 2345 397 281 North Road 2404 449 348 Brighton Station 855 173 107 Compton Avenue 778 221 124 Seven Dials 642 155 97 Osmond Road 272 83 55 Montefiore Road 630 127 49 Lyon Close 639 145 105 Holland Road 420 92 57 Wilbury Villas 593 191 117 Eaton Gardens 571 241 170 Hove Station 663 274 191 Livingstone Road 859 247 166

Table 5. Number of MAC address in each bus stop at Experiment 02.

Table available in the original PDF paper.

Bus Stops All MAC Address RSSI Filter Non-Mobile Filter 28 bus stops (maximum number) 1 1 None 20 to 27 5 1 None 10 to 19 7 5 5 5 to 9 37 22 19 3 to 4 98 18 13 2 965 198 89 Only in a bus stop 23000 4200 2800

110 Alatiyyah

Table 6. Results comparison for the number of passengers obtained by the developed system and manual recording in Experiment 02.

Table available in the original PDF paper.

Bus Stop Name Manual System Bus Stop Name Manual System Brighton Marina 20 5 North Street 27 20 Arundel Road 26 9 Clock Tower 21 12 LiDL Superstore 26 19 North Road 20 20 Sussex Square 28 11 Brighton Station 11 10 St Marys Hall 29 16 Compton Avenue 12 29 Chesham Street 29 18 Seven Dials 18 16 County Hospital 35 18 Osmond Road 20 7 College Place 35 27 Montefiore Road 20 49 Gala Bingo Hall 39 17 Lyon Close 21 105 Park Street 39 7 Holland Road 23 57 Devonshire Place 39 9 Wilbury Villas 20 8 Law Courts 37 13 Eaton Gardens 19 9 Old Steine 31 21 Hove Station 13 5 Old Steine2 31 14 Livingstone Road 13 5

DISCUSSION

This section discusses the findings from Experiments in the context of existing literature, focusing on the factors influencing system performance and identifying opportunities for improvement in Wi-Fi-based passenger estimation systems.

The results from Experiments indicate that the system tends to overestimate passenger numbers in environments with high pedestrian activity or vehicular congestion. This behavior aligns with observations by Mishalani et al. (2016) and Paradeda et al. (2019), who highlighted the impact of external environmental factors on similar systems. These findings underscore the challenges of accurately distinguishing on-bus signals from external ones in crowded urban settings.

Experiment #1 demonstrated how bus stops at traffic signals led to increased capture of MAC addresses from nearby pedestrians, influencing the system’s accuracy. This reflects the variability introduced by the bus’s movement and external factors, consistent with findings by Nitti et al. (2020) in their iABACUS system. Such scenarios necessitate more robust filtering mechanisms to reduce false positives from nearby devices.

In Experiment #2, the system performed better during peak times, capturing signals more effectively from passengers who had their smartphones’ Wi-Fi enabled. However, variability in smartphone usage behavior among passengers—such as devices with Wi-Fi disabled or passengers without smartphones—remained a key challenge, as also noted by Wang and Zhang (2020). These factors highlight the need for systems to account for demographic differences and behavioral patterns in smartphone usage.

The findings from Experiments #1 and #2 contribute to the growing research on Wi-Fi-based passenger estimation systems. While they demonstrate the potential of using Wi-Fi signals for estimating bus

Wi-Fi Signal Analysis via Smartphones for Estimating Passenger Counts 111

occupancy, they also highlight the need for refinement in filtering algorithms and system calibration. Integrating GPS technology and additional data sources, such as multiple signal monitors, could enhance accuracy by minimizing errors from external signals, as suggested by Nitti et al. (2020) and Junior et al. (2022).

To enhance system performance, future improvements should focus on refining filtering algorithms to better differentiate between on-bus and external signals, thereby reducing false positives. Additionally, recalibrating signal capture percentages could help address variations in passenger demographics and smartphone usage behaviors, ensuring more accurate estimations. Integrating GPS technology and multi-monitor setups would provide supplementary contextual data, enabling more precise signal analysis and minimizing errors caused by external sources. These enhancements, informed by experimental findings and existing literature, can significantly improve the reliability and accuracy of Wi-Fi-based passenger estimation systems in urban transit environments.

CONCLUSION

This study introduced a novel system for estimating bus passenger numbers using Wi-Fi signals emitted by smartphones, with a focus on signal detection, data filtering, and passenger count estimation. The system demonstrated high accuracy in moderately crowded conditions, with deviations averaging 20% and accuracy rates of 90% to 100%. However, in high-density environments, it tended to overestimate passenger counts due to external factors such as pedestrian activity and vehicular congestion, as well as variability in smartphone usage behaviors. To address these limitations, future work should refine filtering algorithms to better distinguish on-bus signals from external ones and incorporate GPS technology and multi-monitor setups to enhance contextual accuracy. Adjusting signal capture mechanisms to account for demographic variations and smartphone usage patterns could further improve precision. Expanding the system’s application to other high- density scenarios, such as malls or stadiums, and conducting additional testing in diverse operational conditions, will help ensure its scalability and reliability for real-world use.

REFERENCES

Bánhalmi, A., Bilicki, V., Megyeri, I., Majó-Petri, Z., & Csirik, J. (2021). Extracting information from Wi-Fi traffic on public transport. International Journal of Transport Development and Integration, 5, 15–27. doi: 10.2495/TDI-V5-N1-15-27. Bergé, L. P., Dubois, E., & Raynal, M. (2015). Design and evaluation of an ‘around the smartphone’ technique for 3D manipulations on distant display. 3rd ACM Symposium on Spatial User Interaction (SUI), Los Angeles, CA, USA, August 8–9, pp. 69–78. doi: 10.1145/2788940.2788950. De Sanctis, M., Cianca, E., Di Domenico, S., Provenziani, D., Bianchi, G., & Ruggieri,

M. (2015). WiBeCAM: Device-free human activity recognition through Wi-Fi beacon-enabled camera. 2nd Workshop on Physical Analytics, Florence, Italy, May 22, pp. 7–12. doi: 10.1145/2753497.2753503.

112 Alatiyyah

Farulla, G. A., Russo, L. O., Rosa, S., & Indaco, M. (2015). ORIENTOMA: A novel platform for autonomous and safe navigation for blind and visually impaired. 10th International Conference on Design and Technology of Integrated Systems in Nanoscale Era (DTIS), Naples, Italy, April 20–24, pp. 1–6. doi: 10.1109/DTIS.2015.7127360. Hidayat, A., Terabe, S., & Yaginuma, H. (2020). Estimating bus passenger volume

based on a Wi-Fi scanner survey. Transportation Research Interdisciplinary Perspectives, 6, 100142. doi: 10.1016/j.trip.2020.100142. Hu, S., Su, L., Liu, H., Wang, H., & Abdelzaher, T. F. (2015). Smartroad: Smartphone-based crowd sensing for traffic regulator detection and identification. ACM Transactions on Sensor Networks (TOSN), 11, 1–27. doi: 10.1145/2806890. Maekawa, Y., Uchiyama, A., Yamaguchi, H., & Higashino, T. (2014). Car-level congestion and position estimation for railway trips using mobile phones. ACM International Joint Conference on Pervasive and Ubiquitous Computing, Seattle, Washington, September 13-17, pp. 939–950. doi: 10.1145/2638728.2641553. Nicolau, H., Montague, K., Guerreiro, T., Rodrigues, A., & Hanson, V. L.

(2015). Holibraille: Multipoint vibrotactile feedback on mobile devices. 12th International Web for All Conference (W4A), Florence, Italy, May 18-20, pp. 1–4. doi: 10.1145/2745555.2746655. Nitti, M., Pinna, F., Pintor, L., Pilloni, V., & Barabino, B. (2020). iABACUS: A Wi- Fi-based automatic bus passenger counting system. Energies, 13(6), 1446. doi: 10.3390/en13061446. Park, D. H., Liu, M., Zhai, C., & Wang, H. (2015). Leveraging user reviews

to improve accuracy for mobile app retrieval. 38th International ACM SIGIR Conference on Research and Development in Information Retrieval, Santiago, Chile, August 9–13, pp. 533–542. doi: 10.1145/2766462.2767734. Pew Research Center. (2014). Older Adults and Technology Use. Retrieved from https://www.pewinternet.org/2014/04/03/older-adults-and-technology-use/ [Accessed 10 Oct 2023]. Ryu, S., Park, B. B., & El-Tawab, S. (2020). WiFi sensing system for monitoring

public transportation ridership: A case study. KSCE Journal of Civil Engineering, 24, 3092–3104. doi: 10.1007/s12205-020-2120-3. Scholz, M., Kohout, L., Horne, M., Budde, M., Beigl, M., & Youssef, M. A.

(2015). Device-free radio-based low overhead identification of subject classes. 2nd Workshop on Physical Analytics, Florence, Italy, May 22, pp. 1–6. doi: 10.1145/2753497.2753501. Wang, Y., & Zhang, X. (2020). Estimating Transit Ridership Using Wi-Fi Signals: An Enhanced Rule-Based Approach. IEEE International Conference on Systems, Man, and Cybernetics (SMC), Toronto, Ontario, Canada, October 11–14, pp. 2425–2431. doi: 10.1109/SMC42975.2020.9282884. Wei, B., Hu, W., Yang, M., & Chou, C. T. (2015). Radio-based device-free activity

recognition with radio frequency interference. 14th International Conference on Information Processing in Sensor Networks, Seattle, Washington, April 13–16, pp. 154–165. doi: 10.1145/2737095.2737106. Zeng, Y., Pathak, P. H., & Mohapatra, P. (2015). Analyzing shopper’s behavior through Wi-Fi signals. 2nd Workshop on Physical Analytics, pp. 13–18. doi: 10.1145/2753497.2753517.

Cover of the proceedings volume Human Interaction and Emerging Technologies (IHIET-AI 2025): Artificial Intelligence and Future Applications

Explore the complete digital volume

Human Interaction and Emerging Technologies (IHIET-AI 2025): Artificial Intelligence and Future Applications

Read this individual research paper free through the original publisher, or explore the full digital proceedings book.

ISBN 978-1-964867-37-3

Explore this ISBN in the AHFE Bookstore Listed in the July 2026 bookstore catalogue; search by ISBN to confirm current availability · Digital book purchase optional

Explore Related Research

Related research 8 matches

More papers from this volume

← Back to Research ExplorerBrowse the full library →