Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems https://openaccess.cms-conferences.org/#/publications/book/978-1-7923-8988-7
INTRODUCTION
With the continuous growth of China's aircraft traffic and the continuous ex-pansion of fleet size, higher requirements are put forward in the field of aircraft maintenance and design in order to ensure the safe operation of aircraft. Due to limited resources such as the operator’s information processing capacity, memory and attention, unreasonable workflows and unbalanced workloads can lead to operator performance degradation and even errors when conducting heavy and time-critical tasks. Therefore, it is of great significance to study the workload of civil aviation maintenance personnel (Sahay A, 2012).
At present, the main methods of workload assessment, such as questionnaire sur-vey, secondary task evaluation and physiological index evaluation, provide great help for workload assessment (Rubio S et al. 2004). Whereas the questionnaire method is susceptible to the influence of expert experience, the secondary task evaluation method has higher requirements for experimental design and control, and the physiological index evaluation method has more complicated physiological sig-nal acquisition procedures, long cycle and high experimental cost (Haapalainen E et al. 2010) (Ryu K and Myung R. 2005). The VACP model (Mitchell D K, 2000), a powerful cognitive tool, proposes that workload consists of Visual (V), Auditory (A), Cognitive (C), and Psychomotor (P). The VACP model can reflect the nature of workload more comprehensively.
This paper designs a workload evaluation method based on VACP model. We set up the therblig's analysis function module, a workload evaluation module based on the VACP model. In addition, in order to verify the effectiveness of the second function, this paper took civil aviation aircraft maintenance tasks as the research object and recruited a total of 6 male college students to participate the maintenance experiment. The experiment verifies the accuracy and validity of the system output.
METHOD
Therblig's analysis In the early stages of his research, Gilbreth broke down hand-centered tasks into 17 movements and labeled them with different markers. A therblig is the smallest unit that constitutes the action of an operation. According to the effects of therbligs on operation, therbligs can be divided into three categories: effective therbligs, auxiliary therbligs and ineffective therbligs. The goal of kinetic element analysis is to delete invalid therbligs, reduce auxiliary therbligs, optimize and analyze the actual operation process, develop standardized operation process, and improve work efficiency.
Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems https://openaccess.cms-conferences.org/#/publications/book/978-1-7923-8988-7
Figure 1 Descriptions and categories of Therbligs VACP model
The VACP model, a powerful cognitive tool, proposes that workload consists of Visual (V), Auditory (A), Cognitive (C), and Psychomotor (P). The VACP model can reflect the nature of workload more comprehensively. VACP models are primarily used to assess the workloads in jobs and their associated tasks. When the operator completed the maintenance task, the four channels in each task were rated on a scale of 1 to 7 based on the VACP scale, and the four scores were later summarized to calculate the total unit task load. The method is highly diagnostic, highly effective, and relatively easy to understand.
Table1 VACP Scale Channel Score Description
Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems https://openaccess.cms-conferences.org/#/publications/book/978-1-7923-8988-7
For any maintenance, the module can decompose the activity into a combination of maintenance therbligs, together with related attributes such as name, type and duration. The system determines whether there are uneconomical, unbalanced, and unreasonable phenomena in the action through the Gilbreths principle, and the rational adjustment of the operator's action flow, so as to achieve the improvement of the overall efficiency of the operator's maintenance work, and to make the operator's physical and mental pleasure to a certain extent promote.
A workload evaluation module based on the VACP model design We evaluated the workload values of the four channels according to the maintenance video. The system will calculate the workload of the maintenance operator based on the VACP function, and output the calculation results as a line graph to the system interface.
Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems https://openaccess.cms-conferences.org/#/publications/book/978-1-7923-8988-7
Experiment Design Based on the A320 main wheel disassembly and maintenance task, an evaluation test was conducted on the workload of the operator in the maintenance process, and the effectiveness of a workload evaluation module based on the VACP model of the system was verified by the subjective evaluation value of the workload of the subjects. Correlation analysis was conducted between the subjective evaluation value and the calculated value of a workload evaluation module based on the VACP model to verify the accuracy and effectiveness of a workload evaluation module based on the VACP model.
Participants In this experiment, a total of 6 subjects were male postgraduates from University of Science and Technology Beijing, aged between 23 and 25 years old, with nor-mal vision and hearing. The subjects were trained uniformly before the test to make them proficient in the maintenance task operation of A320 main wheel disassembly. In each experiment, one person participated 2 experiments, and a total of 12 experiments were conducted.
Experimental Facility and Procedure Head-mounted camera and global camera are required to record the experiment. The test procedure was that each subject watched the maintenance video through the system software, scored each maintenance action from four aspects of VACP, and filled in the subjective evaluation table after completion of the operation, as shown in the table 1.
Table 1 Subjective evaluation table
Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems https://openaccess.cms-conferences.org/#/publications/book/978-1-7923-8988-7
RESULTS
We put the system results and subjective evaluation table results into a table for analysis, as shown in the Table 2. In the workload study, correlation analysis was used to verify the effectiveness of the system. Since the dimensions of the evaluation results obtained by the system and subjective evaluation are not uniform, the z-Score standardization method was first used to standardize the calculation results of the two methods. Then, data analysis software was used for correlation analysis, and the correlation coefficient was 0.93 (p < 0.05), which was a significant correlation. Figure 2 shows the workload values obtained by applying the two methods. The trend of
Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems https://openaccess.cms-conferences.org/#/publications/book/978-1-7923-8988-7 lines is basically synchronous and relatively consistent, indicating that the load model has certain validity and reliability.
Table 2 Comparison between System results and Subjective assessment results Number System results Subjective assessment results
Figure 2 Comparison between System results and Subjective assessment results
Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems https://openaccess.cms-conferences.org/#/publications/book/978-1-7923-8988-7
CONCLUSIONS
For the maintenance task, the A320 main wheel disassembly and assembly maintenance task test was carried out. The output result of this system is significantly related to the subjective evaluation result. And compared with the current existing evaluation model, the model proposed in this paper is more accurate and effective. However, the function model of the system based on the VACP model ignores the time factor, because the length of the task will affect the operator workload. Therefore, the function model should consider the maintenance work-load with the time variable in the future. This system can be anticipated to be applied to aircraft maintenance workload assessment, and greatly improve maintenance efficiency, which has a great significance for the ergonomic status of the maintenance personnel.
REFERENCES
Sahay A. Leveraging information technology for optimal aircraft maintenance, repair and overhaul (MRO). Elsevier, 2012. Rubio S, Díaz E, Martín J, et al. Evaluation of subjective mental workload: A
comparison of SWAT, NASA-TLX, and workload profile methods. Applied psychology, 2004,53(1):61-86. Haapalainen E, Kim S, Forlizzi J F, et al. Psycho-physiological measures for assessing cognitive load//: Proceedings of the 12th ACM international conference on Ubiquitous computing, 2010. Ryu K, Myung R. Evaluation of mental workload with a combined measure based on
physiological indices during a dual task of tracking and mental arithmetic. International Journal of Industrial Ergonomics, 2005,35(11):991-1009. Mitchell D K. Mental workload and ARL workload modeling tools. Army Research Lab Aberdeen Proving Ground MD, 2000.
Intelligent Human Systems Integration (IHSI 2022): Integrating People and Intelligent Systems https://openaccess.cms-conferences.org/#/publications/book/978-1-7923-8988-7